On Tue, 9 Dec 2003, Mike O'Toole wrote: > Hi Guys, > > I too am having some issues with local client printing. I have setup a > printer on my ws1, and edited the lts.conf file to contain the following > under the config for ws1: > > PRINTER_0_DEVICE = /dev/lp0 and > PRINTER_0_TYPE = P > > On the server, I then created the printer with the printer wizard and > configured it to be a "Jet Direct" printer on port 9100. > > However, when I try to print to it, it tells me the network connection is > buys, and when I try to telnet to it I get the following message: > > Trying 192.168.50.151... > telnet: Connect to address 192.168.50.151: Connection refused > > Is there anything I need to configure on the client to get this working?
Are you sure that the PRINTER_0_DEVICE and PRINTER_0_TYPE are setup in the section for that workstation ? Jim McQuillan [EMAIL PROTECTED] > > Thanks, > > Mike > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesday, December 03, 2003 2:01 PM > To: roland gaulon > Cc: [EMAIL PROTECTED] > Subject: Re: [Ltsp-discuss] printing on server > > > > Roland, > > Did you tell CUPS that the printer is on a JetDirect interface > at port 9100 ? > > That's what you need, because the lp_server daemon acts just like > an HP JetDirect printer server. > > To test that the printer is actually working, you can > try this: > > telnet 192.168.100.6 9100 > > Then, whatever you type should appear on the printer. > Press Ctrl-J to advance a line and Ctrl-L to do a form-feed. > > When done with that test, Ctrl-] and 'q' to quit. > > Jim McQuillan > [EMAIL PROTECTED] > > > > > On Wed, 3 Dec 2003, roland gaulon wrote: > > > bonjour > > I tried to install a printer on a workstation running ltsp 3.0 with a > > server mandrake 9.2 > > i modified the cups configuration of the printer running quite well on > > the server to print with the remote similar printer by only changing > > the location: 192.168.100.6 > > then i modified the lts.conf adding 2 lines: > > PRINTER_0_DEVICE = /dev/lp0 and > > PRINTER_0_TYPE = P > > i got no printing and i did not see where spooling is made, but > > something was sent out from the server ethernet interface. > > what did i do wrong? > > thanks for your help > > > > > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by OSDN's Audience Survey. > > Help shape OSDN's sites and tell us what you think. Take this > > five minute survey and you could win a $250 Gift Certificate. > > http://www.wrgsurveys.com/2003/osdntech03.php?site=8 > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.freenode.net > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by OSDN's Audience Survey. > Help shape OSDN's sites and tell us what you think. Take this > five minute survey and you could win a $250 Gift Certificate. > http://www.wrgsurveys.com/2003/osdntech03.php?site=8 > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > > > ------------------------------------------------------- > This SF.net email is sponsored by: IBM Linux Tutorials. > Become an expert in LINUX or just sharpen your skills. Sign up for IBM's > Free Linux Tutorials. Learn everything from the bash shell to sys admin. > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
