Vernon, Are you using the default PXE files that I supply in the ltsp_kernel-3.0.15 package ? Or, have you modified the pxelinux.cfg/default file.
If you've modified it, can you show us what is has ? Jim McQuillan [EMAIL PROTECTED] On Fri, 7 May 2004, Vernon Fox wrote: > Hi Guys. > > I'm new to LTSP but have experience in configuring Diego Torres Milano's > PXES software for booting thin clients so am hoping I've got the basics > covered in terms of set up and config of the server and client. > > I am experiencing the following scenario when attempting to boot my client > in the folliwing setup: > > Server = Compaq ProLiant - RedHat 9.0 - LTSP4 > > Client = Compaq Deskpto - Intel Pro/100 S Adapter - PXE > 2.0 Build 0.78 (Wfm 2.0), RPL V2.73 > > I have the server and client connected to a private 8 port hub. > > DHCP and TFTP are configured and functional on the server. > > I boot the client and PXE recieves the correct IP address from the server. > > TFTP then kicks in and attempts to load the config file - I do not have a > specific file for the IP address set in the pxelinux.cfg directory as yet > and am just running with the basic default file. > > TFTP works it way through the various options and eventually comes to the > default file - this file is as per standard instalation with no changes. > > I recieve the following messages on the client: > > Missing parameter in config file. > Loading bzImage-2.4.24-ltsp-4................................ > Loading initrd-2.4.24-ltsp-4.gz................................ > Ready. > > and that's basically it. > > I am looking for the clients to boot into a graphical environment and have > also checked the gdm.conf file as well as standard issues such as > etc/hosts.allow etc. > > Can anyone shed any light please on where I'm going wrong? What parameter > might I be missing and in which config file?? > > Many thanks in advance. > > > Vernon > > > > > ********************************************************************** > The information in this email is confidential and may be legally privileged. > It is intended solely for the addressee and access to the email by anyone else is > unauthorised. > If you are not the intended recipient, any disclosure, copying, distribution or any > action taken or omitted to be taken in reliance on it, is prohibited and may be > unlawful. > When addressed to our clients, any opinions or advice contained in this e-mail are > subject to the terms and conditions expressed in the governing client engagement > letter or contract. > > If you have received this email in error please notify [EMAIL PROTECTED] > ********************************************************************** > > > > ------------------------------------------------------- > This SF.Net email is sponsored by Sleepycat Software > Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to > deliver higher performing products faster, at low TCO. > http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
