Hello,
I've been struggling to get sound working on the Jammin-125.
I first tried using the ltsp_kernel-3.0.15 release, but there was no module for the cx5530 soundchip, although there was a note from Jim in the README dated 4/6/2004 that he added the cs5530 sound driver.
So, I rolled back to the ltsp_kernel-3.0.13 release, in which the cx5530 driver existed. However, this did not seem to work at all with sound enabled in lts.conf using esd. esd runs, but the server doesn't respond locally or remotely.
I found out that the sb module might work, so I specified the sb module (with no options). This works for only a short while. After a time, the shell screen will print this error message to the console:
Sound: DMA (input) timed out - IRQ/DRQ config error?
I suspect that I either need to specify options for the module (but why would it work for a little while?) or I need to use the right driver, which doesn't work.
Would Jim or anyone who has had similar issues have any suggestions as to what I need to do?
Thanks in advance for your help.
Nathan
------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
