On Thu, 2005-05-12 at 14:24 -0700, Robert Arkiletian wrote: > X4_MODULE_01 = glx > > in lts.conf but I don't know where to put the DRI stuff. > when I run glxgears on a client with an ATI Rage 128 (which has 3D > accel in X) I get the message > libGL error: XF86DRIAuthConnection failed > but glxgears still runs but only gets around 70fps. I think it must be > using MESA software accel. How do I enable hardware 3D accel. on > clients that have capable video cards? > Also interesting is when the glxgears is run on the client it eats only > 0.1% of cpu but if run on the server it eats 99% cpu. What's going on > here?
More or less confirms my suspicion that you need to build a specific xorg.conf file for your workstation. As per my understanding the X conf file is built during the terminal boot and that is why you may not be getting DRI settings. If you have a pre-built X file for a terminal you can pass on what ever settings that you need. This also answers the other post. -- Sudev Barar Learning Linux ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
