|
I have a new D-Link 530TX (Canada) installed in a old Pentium 166. I
am booting from a floppy using the via-rhine-6105 [0x1106,0x3106]
rom-o-matic image. I have also installed the same card in my Linux box
to confirm the numbers using lspci. The disk image boots and ID's the
card properly but the boot process stops at "Cannot find NIC in list". I have looked for and "initrd" image to edit the "niclist" file but cannot find one. I guess the "initrd" file is created on the fly. Where do I go to add the NIC the the "niclist" file. I have also tried the option-128 & 129 in the dhcpd.conf file to no avail. Any thoughts Serge --
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
Serge Bromow Omen Systems Int'l <[EMAIL PROTECTED]> 888 411-OMEN (6636) Ottawa, Canada. IMPORTANT NOTICE: This message is intended only for the use of the individual or entity to which it is addressed. The message may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Omen Systems immediately by email at [EMAIL PROTECTED]. Thank you. |
