On Fri, 2005-08-12 at 13:41 -0400, Joe Auerbach wrote: > Problem: I got ltsp running just great with many systems (well, just > four right now). So far so good. But the workstations only seem to > work with LCD monitors. When I try to use a CRT I get "HV Frequence > Over Range". > > This confuses me. What's worse, I think it's because the system is > trying to feed the monitor more resolution than it can handle, but I > don't know how to fix it without lowering the resolution of everyone on > hte system. >
You can specify monitor settings per workstation (or group of workstations) in the lts.conf file, for example: [myws] X_HORZSYNC = "28-96" X_VERTREFRESH = "50-75" X_MODE_0 = "1152x864 83.54 1152 1184 1496 1528 864 881 890 908" X_MODE_1 = "1024x768 64.56 1024 1056 1296 1328 768 783 791 807" See http://wiki.ltsp.org/twiki/bin/view/Ltsp/VideoCards#Setting_resolution John ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
