On 28/03/07, Ondrej Rusek <[EMAIL PROTECTED]> wrote:
> I have problem with setting video resolution on HP t 5125. This client
> has via chipset and using video driver 'via'. LCD monitor (17'') can use
> resolution [EMAIL PROTECTED] With kernels 2.4 on client, video works fine -
> 1280x1024. But with 2.6 kernel (ltsp 4.2) with the same lts.conf my LCD
> monitor says 'Unsuported video mode'. After testing it on the other LCD
> I saw, that the output resolution to the LCD is 1280x960... My lts.conf are:
>
> [hp] #.................. HP thin client t5125
> X_VERTREFRESH = "60"
> X_MODE_0 = 1024x768
^^^^^^^^^^^
This is what will limit the resolution. Do you need to have this many
lines in lts.conf for this client?
> # X_MODE_0 = 1280x1024 60 1024 1048 1184 1328 768 771 777 806
> -hsync -vsync
[SNIP]
> Can you anybody help me, how set the correct modeline (or something
> else) in the lts.conf for the resolution 1280x1024?
What XSERVER you are specifying? I would say that most of the LCD
monitors should work just fine without any detailed modeline and
refresh rate description.
--
Regards,
Sudev Barar
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
