Sudev Barar napsal(a): >> [hp] #.................. HP thin client t5125 >> X_VERTREFRESH = "60" >> X_MODE_0 = 1024x768 > ^^^^^^^^^^^ > This is what will limit the resolution. Do you need to have this many > lines in lts.conf for this client?
This is the working setting - only 1024x768. With ltsp 4.1 (kernels 2.4) I used res. 1280x1024, but now, with 2.6 kernels not working. >> # X_MODE_0 = 1280x1024 60 1024 1048 1184 1328 768 771 777 806 >> -hsync -vsync This modeline not working with my LCD. And this: X_MODE_0 = 1280x1024 ... not working too. > What XSERVER you are specifying? I would say that most of the LCD > monitors should work just fine without any detailed modeline and > refresh rate description. XSERVER = "auto" But really clients work with XSERVER = "via" (ltspinfo). -- S pozdravem -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Ondrej Rusek GYmnazium BOzeny Nemcove, Hradec Kralove, Czech [EMAIL PROTECTED], http://www.gybon.cz/~rusek ICQ: 150366991, IRC: irc.freenode.net #edunix-cz -------------------------------------------------- X-terminals in school - http://www.gybon.cz/edunix =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
