Hello all, I'm setting up LSTP5 with Feisty 64bit. All is ok. The clients can boot.
I then connect and setup an Epson LX300 dot-matrix printer on client1 using an IBM Compatible printer driver. From client1 I can print to it OK. But, I cannot print to it from any other client or the server, with error: "Network host is busy will retry in 30 seconds" This is my lts.conf: [00:19:66:16:23:93] <-- the mac address of client1 PRINTER_0_TYPE=P PRINTER_0_DEVICE=/dev/lp0 In adding the printer, I use: - Network Printer (Jet direct) - Put the ip address of client1 - And the port 9100 Is there any step that I miss? There's no any firewall in the client and server. I build the client environment using --arch i386 because the clients are 32bit PC. Thank you very much. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 19:10:30 up 26 min, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn.
signature.asc
Description: This is a digitally signed message part.
------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
