Hello *, I am setting up LTSP 5 for the first time using Etch + backports. Everything is working great (LTSP 5 is GREAT!) but am having an issue getting USB floppy drives working.
On boot (or when hot plugged after boot) they are seen as SDA but then I get an error about unknown partition table so they do not show up as a drive. Same error regardless if I have a floppy in the drive or not. USB flash drives work fine. GREAT actually. Any suggestions? The drives will always be present, so a forced mount would be OK. Perhaps I can just echo the correct info to the client's "/var/run/ltsp_fstab" file on boot? Would that work? Thanks guys for yet another great release of LTSP. Pete Billson -- http://www.elbnet.com ELB Internet Service, Inc. Reliable Tech Support for New Jersey's Public Libraries PS - If it matters I am using LDM with the DIRECTX option. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
