On Friday 27 June 2008 03:04:40 [EMAIL PROTECTED] wrote: > > I need some guidance on getting a Visara thin client to boot on OpenSUSE > > 11.0 with Kiwi LTSP. I have several Visara e300 eTerms with this > > hardware: > > > > SIS550 200mhz processor > > 32 meg DOC with Bios and WinCE 4.2 image on it. > > 64 meg ram PC-133 > > Selectable Shared ram for Video up to 64 meg > > Unfortunately lowest RAM I have been able to boot a client was 128M, > for a best experience I would recommend 265M minimum.
But with a Suse install you could then take the kernel and initrd and/or the squash image from your EdBuntu to get everything working, (I've not tried, but I speculate you need only the squash image) Cheating, but it works (that's how I had SuSE running, now I'm playing with KIWI) Anybody: Yesterdays instructions from CyberOrg ... Yast -> KIWI ... Ummm no! OneClick install on a new 11 install. Pre-built image. Yast is devoid of anything kiwi-like. Edit of /etc/sysconfig/kiwi-ltsp seems the only option ? James ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
