On Tuesday 01 July 2008 02:08:09 [EMAIL PROTECTED] wrote: > >> I had install Ubuntu 8.04 alternate for my LTSP Server and works great > >> but in my client there is Hardisk IDE to save the document because My > >> Hardisk in the server is almost full > >> > >> How to detect that hardisk and using it? > > > > Your user must be a member of the 'fuse' group. After that I believe your > > local disk should appear on the desktop if you haven't disabled local > > devs in lts.conf. > > i had it > > this my /etc/group > > fuse:x:107:daus,siswa,tes > > and this my lts.conf > > [00:90:f5:45:7b:cf] > LOCALDEV = True > SOUND = True > NBD_SWAP = True > SCREEN_02 = shell > [00:19:66:05:75:f7] > LOCALDEV = True > SOUND = True > NBD_SWAP = True > > > i dont know why i use my old edubuntu 7.10 it detect hardisk on my laptop > althougth it only detect one partition but it did'nt work at all with my PC > Thin Client it did'nt detect anything > > Anybody have clue how to debug it
You don't want to hear this but don't do it. It will bite you and leave blood :-) How are you going to fsck the local disk? How does user 1 get their documents on terminal 2? A full disk means BadPerformance. It used to be no fuller than 75%. Modern disks say 85%. A 500G disk in Australia cost 2 hours. You are going to spend 10x that time. James ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
