Bob, You can use mii-tool or ethtool to make sure the nic sees a cable connected.
Also, is there any chance that both interfaces are connected to the same switch/hub? I've seen this cause strange problems. If they are connected to the same switch, then you should make sure they're on separate v-lans. Jim McQuillan [EMAIL PROTECTED] Bob Wooden wrote: > I am unable to get activity on my (RTL8139) eth1 nic card. My primary > (onboard) nic (eth0) connects (static address) to my local lan network. > My second nic card is assigned to LTSP. The interfaces eth0 and eth1 > appear in ifconfig. My OS (Ubuntu 8.04LTS-64bit) "sees" the second card > and reports it via "network-admin". > > My system is: > Intel MB DG35EC > Intel Q6600 > primary nic is onboard 10/100/1000 (Intel 82566DC) > secondary nic is RTL8139 (occupies only PCI interface on MB) > > Thinking I had a bad RTL8139, I tried a different RTL8139. > > Still no LED activity (on back of computer) on eth1. > > Now, I realize this is not a LTSP issue, but I am not sure what to try > next. Any suggestions? > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
