>> Bob Wooden wrote: >> I am unable to get activity on my (RTL8139) eth1 nic card. My primary >> (onboard) nic (eth0) connects (static address) to my local lan network. >> My second nic card is assigned to LTSP. The interfaces eth0 and eth1 >> appear in ifconfig. My OS (Ubuntu 8.04LTS-64bit) "sees" the second card >> and reports it via "network-admin". >> >> My system is: >> Intel MB DG35EC >> Intel Q6600 >> primary nic is onboard 10/100/1000 (Intel 82566DC) >> secondary nic is RTL8139 (occupies only PCI interface on MB) >> >> Thinking I had a bad RTL8139, I tried a different RTL8139. >> >> Still no LED activity (on back of computer) on eth1. >> >> Now, I realize this is not a LTSP issue, but I am not sure what to try >> next. Any suggestions?
sudo ethtool eth1 as Jim mentioned, this will give you some info on the interfaces status. dmesg | grep eth1 This might give you some more insight. sudo tcpdump -i eth1 This will show you any traffic going in or out of said interface. Bob, as an aside, the onboard intel network interface is far superior to the realtek--opposite ends of the spectrum, really. At 'internet' speeds, i.e., <10mbps, you won't really see the difference, but at 50mbps+, such as seen on even small thin client networks, the intel ethernet offloads much of the cpu's work onto the ethernet controller, resulting in lower system load on your server. I've read too that intel interfaces have better latency, which is a good thing with remote X sessions such as in ltsp. I highly recommend putting the intel NIC on your thin-client side and the RTL or whatever you go with on the WAN side. db ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
