Would Asmo, or anybody out there who has sucessfully upgraded to Lucid please post your /etc/default/tftpd-hpa to the list? I'm stuck on the tftp part of this. I have LTSP 5 and 4.2 installed to run side by side, and I can't even get tftp to work on the LTSP 4.2 clients, much less the LTSP 5. Same problems both versions, so it's not a build client problem. It's got to be a problem with my tftp-hpa setup. (Most likely, anyway.) Kind of stumped.
Any help would be greatly appreciated. ----- Original Message ---- From: "[email protected]" <[email protected]> To: [email protected]; [email protected] Sent: Sat, May 8, 2010 12:32:29 AM Subject: Re: [Ltsp-discuss] Upgrading LTSP from Karmic to Lucid > LTSP usually work ok on Ubuntu but 10.4 does not appear to be in that > category. Both LTSP and LTSP-Cluster work ok on Ubuntu 10.04. I have HP t5125 (manufactured september 2006) thin client as a reference machine and you all know that one is very low end thin client. But it works, too. Do tftpd-hpa trick if needed. Do remove compiz. Do add these lines in lts.conf if needed. LDM_DIRECTX=Y X_COLOR_DEPTH=16 Getting some fun out of debugging ;-) http://www.arkki.info/?p=151 Best Regards Asmo Koskinen. ------------------------------------------------------------------------------ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------------------------------ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
