On 05/18/2010 09:43 PM, jan nilsen wrote:
> I can put 3 network cards in the server, and connect each of those
> networkcards with it's own 16-port switch, that way I would have
> 300mbit out of the server.
>
> What kind of bonding mode should I choose?
>
> Or is there some other way?
>
> jan
>
Yes, there is.
In a situation like this, I would buy a cheap gigabit switch (8 ports
10/100/1000). Then connect your server there and each of your three switches.
This results in 1 Gbit out of the server and 100 Mbit to each swtch.
This is what you get from your bonding idea, just quicker and easier.
If your existing swtiches do have gigabit uplinks, you can use these to
improve things even further.
If they also permit "cable bonding", which ususally comes with
"manageable switches", then you can combine 2times 100 mbit to each
switch, giving 200Mbit to each swith on the input side.
Take care and good luck
Eberhard.
------------------------------------------------------------------------------
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
