Hello, what i found out so far. Ltsp-server 5.5 from the repo ts.sch.gr will only work if you don’t do a ltsp-build-client instead you have to do a ltsp-update-image --cleanup / .
If i only do a ltsp-build-client I end up in the busy box. A ltsp-update-image -cleanup / makes a huge diffent. Instead o a busy box the client gets a login screen. Does anyone know why it only works this way? Best regards -----Ursprüngliche Nachricht----- Von: Funke, Martin [mailto:m.fu...@olpe.de] Gesendet: Donnerstag, 27. Februar 2014 09:06 An: 'ltsp-discuss@lists.sourceforge.net' Betreff: Re: [Ltsp-discuss] Busybox with ltsp 5.5 and xubuntu12.04 Wichtigkeit: Hoch -----Ursprüngliche Nachricht----- Von: Vagrant Cascadian [mailto:vagr...@debian.org] Gesendet: Dienstag, 25. Februar 2014 16:47 An: ltsp-discuss@lists.sourceforge.net Betreff: Re: [Ltsp-discuss] Busybox with ltsp 5.5 and xubuntu12.04 On Tue, Feb 25, 2014 at 09:39:23AM +0000, Funke, Martin wrote: > at the moment im trying to get ltsp 5.5 with xubuntu 12.04 to run. ... > -vim /etc/dnsmasq.conf -> ... > # Dnsmasq wird zu einem Proxy-DHCP. Die IP-Adresse ist diejenige des > Servers dhcp-range=192.168.1.5,proxy # Ein PXE-Menü wird benötigt, > sonst funktioniert Proxy-DHCP mit dnsmasq nicht. > Die Zahl gibt die Sekunden an, nach denen der erste Eintrag gestartet > wird > pxe-prompt="F8 druecken fuer Bootoptionen", 3 # Eintrag für > Netzwerkboot pxe-service=X86PC, "Netzwerkboot", /ltsp/i386/pxelinux > #pxe-service=X86PC, "Netzwerkboot", /ltsp/amd64/pxelinux > What worked till the point with the error is: ... > 1. Client received dhcp and dnsmasq informations 2. Client loads image > 3. Loading screen 4. Busybox error message: ubuntu ltsp mounting > /dev/nbd0 on /root failed >If you're doing a single network card setup, it's probably trying to connect >to your router rather than the LTSP server. You'll need to add >IPAPPEND=3 to >/opt/ltsp/i386/etc/ltsp/update-kernels.conf, then run: Till the point of /opt/ltsp/i386/etc I have this folders but I am missing ltsp/update-kernels.conf >sudo ltsp-chroot /usr/share/ltsp/update-kernel sudo ltsp-update-kernels >This should add ipappend lines to >/var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default, which should tell pxelinux >to pass boot arguments to avoid making a second DHCP request, >which could be >directly from your router, and not contain the needed LTSP information. I added ipappend 3 in /var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default but the busybox still appears. >If your LTSP thin client environment is amd64, change i386 to amd64 above. Sorry the build above didn’t match my problem. To change from i386 to amd64 or the opposite case is clear. I only have this problem with ltsp 5.5 from the repo ts.sch.gr when I install ltsp-server from the default repos I have version 5.3.7 and it works. What I'm curious about is what is the difference? Best regards Martin live well, vagrant ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
