2008/9/19 Enzo Barlotta <[EMAIL PROTECTED]>: > Al insertar el modem me aparece esto en el dmesg > > [ 669.828446] usb 3-1: new full speed USB device using uhci_hcd and address > 4 > [ 669.863417] usb 3-1: configuration #1 chosen from 3 choices > [ 669.887832] scsi7 : SCSI emulation for USB Mass Storage devices > [ 669.888222] usb-storage: device found at 4 > [ 669.888226] usb-storage: waiting for device to settle before scanning > [ 670.873740] usb-storage: device scan complete > [ 670.874696] scsi 7:0:0:0: Direct-Access SEMC MMC Flash Card > 0 PQ: 0 ANSI: 0 > [ 670.889635] sd 7:0:0:0: [sdb] 348161 512-byte hardware sectors (178 MB) > [ 670.896595] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled > [ 670.896601] sd 7:0:0:0: [sdb] Assuming drive cache: write through > [ 670.905599] sd 7:0:0:0: [sdb] 348161 512-byte hardware sectors (178 MB) > [ 670.912587] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled > [ 670.912591] sd 7:0:0:0: [sdb] Assuming drive cache: write through > [ 670.912599] sdb: sdb1 > [ 670.921588] sdb: p1 exceeds device capacity > [ 670.923614] sd 7:0:0:0: [sdb] Attached SCSI removable disk > [ 670.923682] sd 7:0:0:0: Attached scsi generic sg2 type 0 > [ 671.271972] attempt to access beyond end of device > [ 671.271980] sdb: rw=0, want=348168, limit=348161 > [ 671.271985] Buffer I/O error on device sdb1, logical block 348160 > [ 671.271992] attempt to access beyond end of device > [ 671.271996] sdb: rw=0, want=348168, limit=348161 > [ 671.271999] Buffer I/O error on device sdb1, logical block 348160 > [ 671.272029] attempt to access beyond end of device > [ 671.272032] sdb: rw=0, want=348162, limit=348161 > [ 671.272036] Buffer I/O error on device sdb1, logical block 348154 > [ 671.272040] attempt to access beyond end of device > [ 671.272043] sdb: rw=0, want=348163, limit=348161 > [ 671.272046] Buffer I/O error on device sdb1, logical block 348155 > [ 671.272050] attempt to access beyond end of device > [ 671.272053] sdb: rw=0, want=348164, limit=348161 > [ 671.272057] Buffer I/O error on device sdb1, logical block 348156 > [ 671.272061] attempt to access beyond end of device > [ 671.272064] sdb: rw=0, want=348165, limit=348161 > [ 671.272067] Buffer I/O error on device sdb1, logical block 348157 > [ 671.272071] attempt to access beyond end of device > [ 671.272074] sdb: rw=0, want=348166, limit=348161 > [ 671.272078] Buffer I/O error on device sdb1, logical block 348158 > [ 671.272082] attempt to access beyond end of device > [ 671.272085] sdb: rw=0, want=348167, limit=348161 > [ 671.272088] Buffer I/O error on device sdb1, logical block 348159 > [ 671.317694] attempt to access beyond end of device > [ 671.317703] sdb: rw=0, want=348162, limit=348161 > [ 671.317707] Buffer I/O error on device sdb1, logical block 348154 > [ 671.317713] attempt to access beyond end of device > [ 671.317716] sdb: rw=0, want=348163, limit=348161 > [ 671.317720] Buffer I/O error on device sdb1, logical block 348155 > [ 671.317724] attempt to access beyond end of device > [ 671.317727] sdb: rw=0, want=348164, limit=348161 > [ 671.317731] attempt to access beyond end of device > [ 671.317734] sdb: rw=0, want=348165, limit=348161 > [ 671.317738] attempt to access beyond end of device > [ 671.317741] sdb: rw=0, want=348166, limit=348161 > [ 671.317745] attempt to access beyond end of device > [ 671.317748] sdb: rw=0, want=348167, limit=348161 > [ 671.317777] attempt to access beyond end of device > [ 671.317780] sdb: rw=0, want=348168, limit=348161 > [ 671.317789] attempt to access beyond end of device > [ 671.317792] sdb: rw=0, want=348168, limit=348161 > [ 671.317801] attempt to access beyond end of device > [ 671.317805] sdb: rw=0, want=348168, limit=348161 > [ 671.317814] attempt to access beyond end of device > [ 671.317817] sdb: rw=0, want=348162, limit=348161 > [ 671.317821] attempt to access beyond end of device > [ 671.317824] sdb: rw=0, want=348163, limit=348161 > [ 671.317828] attempt to access beyond end of device > [ 671.317831] sdb: rw=0, want=348164, limit=348161 > [ 671.317835] attempt to access beyond end of device > [ 671.317838] sdb: rw=0, want=348165, limit=348161 > [ 671.317842] attempt to access beyond end of device > [ 671.317845] sdb: rw=0, want=348166, limit=348161 > [ 671.317848] attempt to access beyond end of device > [ 671.317852] sdb: rw=0, want=348167, limit=348161 > [ 671.340922] attempt to access beyond end of device > [ 671.340930] sdb: rw=0, want=348168, limit=348161 > [ 671.340954] attempt to access beyond end of device > [ 671.340958] sdb: rw=0, want=348168, limit=348161 > [ 671.383566] attempt to access beyond end of device > [ 671.383576] sdb: rw=0, want=348168, limit=348161 > [ 671.383581] attempt to access beyond end of device > [ 671.383585] sdb: rw=0, want=348168, limit=348161 > [ 671.383607] attempt to access beyond end of device > [ 671.383610] sdb: rw=0, want=348162, limit=348161 > [ 671.383614] attempt to access beyond end of device > [ 671.383618] sdb: rw=0, want=348163, limit=348161 > [ 671.383622] attempt to access beyond end of device > [ 671.383625] sdb: rw=0, want=348164, limit=348161 > [ 671.383629] attempt to access beyond end of device > [ 671.383632] sdb: rw=0, want=348165, limit=348161 > [ 671.383635] attempt to access beyond end of device > [ 671.383639] sdb: rw=0, want=348166, limit=348161 > [ 671.383642] attempt to access beyond end of device > [ 671.383646] sdb: rw=0, want=348167, limit=348161 > [ 671.420094] attempt to access beyond end of device > [ 671.420102] sdb: rw=0, want=348162, limit=348161 > [ 671.420107] attempt to access beyond end of device > [ 671.420110] sdb: rw=0, want=348163, limit=348161 > [ 671.420114] attempt to access beyond end of device > [ 671.420117] sdb: rw=0, want=348164, limit=348161 > [ 671.420121] attempt to access beyond end of device > [ 671.420124] sdb: rw=0, want=348165, limit=348161 > [ 671.420128] attempt to access beyond end of device > [ 671.420131] sdb: rw=0, want=348166, limit=348161 > [ 671.420135] attempt to access beyond end of device > [ 671.420139] sdb: rw=0, want=348167, limit=348161 > [ 671.420167] attempt to access beyond end of device > [ 671.420171] sdb: rw=0, want=348168, limit=348161 > [ 671.420179] attempt to access beyond end of device > [ 671.420183] sdb: rw=0, want=348168, limit=348161 > [ 671.420192] attempt to access beyond end of device > [ 671.420195] sdb: rw=0, want=348168, limit=348161 > [ 671.420204] attempt to access beyond end of device > [ 671.420207] sdb: rw=0, want=348162, limit=348161 > [ 671.420211] attempt to access beyond end of device > [ 671.420214] sdb: rw=0, want=348163, limit=348161 > [ 671.420218] attempt to access beyond end of device > [ 671.420221] sdb: rw=0, want=348164, limit=348161 > [ 671.420225] attempt to access beyond end of device > [ 671.420228] sdb: rw=0, want=348165, limit=348161 > [ 671.420231] attempt to access beyond end of device > [ 671.420235] sdb: rw=0, want=348166, limit=348161 > [ 671.420238] attempt to access beyond end of device > [ 671.420242] sdb: rw=0, want=348167, limit=348161 > [ 671.432224] attempt to access beyond end of device > [ 671.432232] sdb: rw=0, want=348168, limit=348161 > [ 671.432242] attempt to access beyond end of device > [ 671.432245] sdb: rw=0, want=348168, limit=348161 > > luego rmmod usb_storage > ERROR: Module usb_storage is in use > > luego umount /media/MD300/ > todo ok, lo desmonta > > y luego... > pppd > ~�}#�!}!}!} }4}"}&} } } } }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } > }%}&;}.4�}'}"}(}"4*~~�}#�!}!}!} }4}"}&} } } } }%}&;}.4�}'}"}(}"4 > > eso es todo, no prende ni una luz, ni me da signos de que se esta > conectando. > > Lo único que he logrado hacer es con VMWare, se conecta pero no descarga > nada. > Pero ese no es el tema quiero poder conectarme con Linux, no mediante una > maquina virtual simulada, ruteando y todo eso. > > --- El mar 16-sep-08, TaNgO <[EMAIL PROTECTED]> escribió: > > De: TaNgO <[EMAIL PROTECTED]> > Asunto: Re: Rv: Modem USB sony ericsson > Para: [email protected] > Fecha: martes, 16 de septiembre de 2008, 8:45 am > > El lun, 15-09-2008 a las 05:02 -0700, Enzo Barlotta escribió: >> >> >> --- El vie 8-ago-08, Enzo Barlotta <[EMAIL PROTECTED]> > escribió: >> De: Enzo Barlotta <[EMAIL PROTECTED]> >> Asunto: Modem USB sony ericsson >> Para: [email protected] >> Fecha: viernes, 8 de agosto de 2008, 10:51 am >> >> Hola, mi pregunta es la siguiente: Que me está faltando para >> conectar el modem USB que viene en Personal? >> >> [EMAIL PROTECTED]:/dev# lspci >> 00:00.0 Host bridge: Intel Corporation Mobile >> PM965/GM965/GL960 Memory Controller Hub (rev 0c) >> 00:02.0 VGA compatible controller: Intel Corporation Mobile >> GM965/GL960 Integrated Graphics Controller (rev > 0c) >> 00:02.1 Display controller: Intel Corporation Mobile >> GM965/GL960 Integrated Graphics Controller (rev 0c) >> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB UHCI Controller #4 (rev 03) >> 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB UHCI Controller #5 (rev 03) >> 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB2 EHCI Controller #2 (rev 03) >> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) >> HD Audio Controller (rev 03) >> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI >> Express Port 1 (rev 03) >> 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI >> Express Port 2 (rev 03) >> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) > PCI >> Express Port 3 (rev 03) >> 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI >> Express Port 4 (rev 03) >> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB UHCI Controller #1 (rev 03) >> 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB UHCI Controller #2 (rev 03) >> 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB UHCI Controller #3 (rev 03) >> 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) >> USB2 EHCI Controller #1 (rev 03) >> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge >> (rev f3) >> 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC >> Interface Controller (rev 03) >> 00:1f.1 IDE interface: Intel Corporation > 82801HBM/HEM >> (ICH8M/ICH8M-E) IDE Controller (rev 03) >> 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM >> (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) >> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus >> Controller (rev 03) >> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. >> 88E8039 PCI-E Fast Ethernet Controller (rev 14) >> 07:00.0 Network controller: Intel Corporation PRO/Wireless >> 4965 AG or AGN Network Connection (rev 61) >> 08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 >> Controller (rev 05) >> 08:09.1 SD Host controller: Ricoh Co Ltd R5C822 >> SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) >> 08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host >> Controller (rev 12) >> 08:09.3 System > peripheral: Ricoh Co Ltd R5C592 Memory Stick >> Bus Host Adapter (rev 12) >> 08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card >> Controller (rev ff) >> >> >> [EMAIL PROTECTED]:/dev# lsusb >> Bus 007 Device 002: ID 04f2:b016 Chicony Electronics Co., Ltd >> Bus 007 Device 001: ID 0000:0000 >> Bus 006 Device 001: ID 0000:0000 >> Bus 005 Device 001: ID 0000:0000 >> Bus 004 Device 005: ID 0fce:d0cf Sony Ericsson Mobile >> Communications AB >> Bus 004 Device 001: ID 0000:0000 >> Bus 003 Device 002: ID 04d9:0499 Holtek Semiconductor, Inc. >> Bus 003 Device 001: ID 0000:0000 >> Bus 002 Device 002: ID 08ff:2580 AuthenTec, Inc. >> Bus 002 Device 001: ID 0000:0000 >> Bus 001 Device 001: ID 0000:0000 >> > >> >> [EMAIL PROTECTED]:/dev# ls -l /dev/ttyU* >> crwxrwxrwx 1 root dialout 188, 0 2008-08-08 08:32 /dev/ttyUSB0 >> crwxrwxrwx 1 root dialout 188, 1 2008-08-08 08:32 /dev/ttyUSB1 >> crwxrwxrwx 1 root dialout 188, 2 2008-08-08 08:32 /dev/ttyUSB2 >> crwxrwxrwx 1 root dialout 188, 3 2008-08-08 10:29 /dev/ttyUSB3 >> crwxrwxrwx 1 root dialout 188, 4 2008-08-08 10:28 /dev/ttyUSB4 >> crwxrwxrwx 1 root dialout 188, 5 2008-08-08 10:28 /dev/ttyUSB5 >> crwxrwxrwx 1 root dialout 188, 6 2008-08-08 10:28 /dev/ttyUSB6 >> crwxrwxrwx 1 root dialout 188, 7 2008-08-08 10:28 /dev/ttyUSB7 >> crwxrwxrwx 1 root dialout 188, 8 2008-08-08 10:28 /dev/ttyUSB8 >> >> >> [EMAIL PROTECTED]:/dev# wvdial >> --> WvDial: Internet dialer version 1.60 >> --> Cannot open > /dev/ttyUSB2: No such device >> --> Cannot open /dev/ttyUSB2: No such device >> --> Cannot open /dev/ttyUSB2: No such device >> >> >> >> wvdial.conf >> >> [Dialer Defaults] >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> Modem Type = Analog Modem >> ISDN = 0 >> Phone = *99# >> New PPPD = yes >> Modem = /dev/ttyUSB2 >> Username = internet #<--- este dato es el que difiere por cada >> proveedor >> Password = internet #<--- este dato es el que difiere por cada >> proveedor >> Baud = 460800 >> >> >> [EMAIL PROTECTED]:/etc# lsmod | grep usb >> usbhid 35296 0 >> hid > 44992 1 usbhid >> usbserial 41840 0 >> usb_storage 82496 1 >> libusual 23520 1 usb_storage >> scsi_mod 178488 6 >> usb_storage,sbp2,sr_mod,sg,sd_mod,libata >> usbcore 169904 8 >> usbhid,usbserial,usb_storage,libusual,uvcvideo,ehci_hcd,uhci_hcd >> > > Hace un tiempo hice andar un huawei. > El paso que te puede estar faltando es > > sudo rmmod usb_storage > > y luego probar otra vez con wvdial. > > Te cuento que al conectarlo en los guinchots lo que hace primero es > cargar un dispotivo USB removible donde tiene los drivers. > > Al parecer, cuando instala los "drivers" lo primero que hace el soft > es > remover el dispositivo de almacenamiento, que ya no necesita. > > Eso en linux hay que ver como automatizarlo. > Para probar, hace lo que te > digo: > > 1) Conectá el modem y espera unos segundos. > 2) Mirá en el dmesg si aparece algún dispositivo de almacenamiento > masivo usb (sda, sdb, o el que sea, dependiendo de tu configuración) > 3) Luego de unos segundos, corre el comando "sudo rmmmod usb_storage" > 4) Verificá con dmesg que haya sido removido el módulo con éxito y, si > todo salió bien, verás aparecer un nuevo dispositivo de comunicaciones > 5) Corré wvdial > > Espero que te haya sido util. > Contanos como te fue, y si es posible, mandá las lineas > del /var/log/syslog que aparecen desde que conectas el modem en el paso > 1, hasta que terminas con el paso 4. > > salu2 > > -- > TaNgO > Río III - Cba. > > > ________________________________ > ¡Buscá desde tu celular! Yahoo! oneSEARCH ahora está en Claro > http://ar.mobile.yahoo.com/onesearch
Te diria que tenes problemas de alimentacion falta de corriente en el usb el modem no viene con un cable doble el usb es 1 , 1.1 o 2? -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, yo no fui, seguro que es mas inteligente.
