Jon
It seems that the instructions (written at the end of May) have grown
stale since the recent realignment on RHEL6.1. We'll get the
instructions updated.
Peter
On 11-06-22 6:03 PM, Jon Zhu wrote:
Hi, all
As a fan of Lustre file system, recently I got a chance to try to
build Lustre whamcloud code v2.1 branch from scratch, the following
build guide works pretty well:
http://wiki.whamcloud.com/display/PUB/Walk-thru-+Build+Lustre+2.1+on+RHEL6+from+Whamcloud+git
Everything works well until the last step, when I
run /usr/lib64/lustre/tests/llmount.sh, it failed with the following
error:
#############################################################################################
[root@ip-10-204-59-145 tests]# /usr/lib64/lustre/tests/llmount.sh
Stopping clients: ip-10-204-59-145 /mnt/lustre (opts:)
Stopping clients: ip-10-204-59-145 /mnt/lustre2 (opts:)
Loading modules from /usr/lib64/lustre/tests/..
debug=0x33f0404
subsystem_debug=0xffb7e3ff
gss/krb5 is not supported
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
Formatting mgs, mds, osts
Format mds1: /tmp/lustre-mdt1
Format ost1: /tmp/lustre-ost1
Format ost2: /tmp/lustre-ost2
Checking servers environments
Checking clients ip-10-204-59-145 environments
Loading modules from /usr/lib64/lustre/tests/..
debug=0x33f0404
subsystem_debug=0xffb7e3ff
gss/krb5 is not supported
Setup mgs, mdt, osts
Starting mds1: -o loop,user_xattr,acl /tmp/lustre-mdt1 /mnt/mds1
mount.lustre: mount /dev/loop0 at /mnt/mds1 failed: Operation not
supported
#############################################################################################
Can anyone shed some light on this issue? Does this mean current
Whamcloud Lustre code base
(git://git.whamcloud.com/fs/lustre-release.git
<http://git.whamcloud.com/fs/lustre-release.git>) is not ready for
test drive?
Detailed system log messages is attached for your information, the
test machine's info is also dumped as following:
[root@ip-10-204-59-145 tests]# uname -a
Linux ip-10-204-59-145 2.6.32.lustre21 #6 SMP Wed Jun 22 15:27:40 EDT
2011 x86_64 x86_64 x86_64 GNU/Linux
[root@ip-10-204-59-145 tests]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.1 (Santiago)
BTW, thanks to the Whamcloud team for contributing so much to Lustre,
without your effort Lustre is almost dead.
Regards,
-Jon.
[email protected] <mailto:[email protected]>
_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss
--
Peter Jones
Whamcloud, Inc.
www.whamcloud.com
_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss
