Malcolm, I ran the command below and I think I got conflicts; however I will try your suggestion below. Thanks again...
Rpm -Uvh e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm libcom_err-1.42.13.wc4-7.el7.x86_64.rpm libss-1.42.13.wc4-7.el7.x86_64.rpm HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Cowe, Malcolm J [mailto:[email protected]] Sent: Monday, May 23, 2016 3:58 PM To: Michael Skiba; [email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question There are several RPMs that need to be installed together in order to update the e2fsprogs packages to the lustre version, which can be confusing when working with YUM and RPM. This is what I do to install the e2fsprogs RPMS: To download: cd $HOME wget -r -np https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/ cd $HOME/downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/ The packages of interest are: [root@rh7z-c3 x86_64]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib* e2fsprogs-1.42.13.wc5-7.el7.x86_64.rpm libcom_err-devel-1.42.13.wc5-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc5-7.el7.x86_64.rpm libss-1.42.13.wc5-7.el7.x86_64.rpm libcom_err-1.42.13.wc5-7.el7.x86_64.rpm libss-devel-1.42.13.wc5-7.el7.x86_64.rpm To install: sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib* (the -devel packages are optional, but I wanted to keep the command line simple :) ) Malcolm Cowe High Performance Data Division Intel Corporation | HYPERLINK "http://www.intel.com"www.intel.com From: lustre-discuss [mailto:[email protected]] On Behalf Of Michael Skiba Sent: Tuesday, May 24, 2016 7:04 AM To: Mannthey, Keith; HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Keith, thanks for the reply back, I am trying to set up a very basic configuration for a POC. Taking my information from the latest Lustre manual and a doc. written from Oak Ridge. The server is what I am working on and going to make it my MGS and MDS. Than make one of the internal drives my MDT. Then add the OSS and OST, than add a client. When I install the rpm ( rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm ) (below is the output in red). The dependence is already installed e2fsprogs-libs-1.42.9-7.el7.x86_64. The only way I get around installing this rpm is to run this yum command "yum install --setopt=protected_multilib=false" (not a good way). If I do this I can get the necessary packages to install. Once this is done I can configure my Lustre Filesystem; however when I mount my filesystem I get the output highlighted in yellow. So it looks like all packages did not load properly from running "yum install --setopt=protected_multilib=false". It also look like bug LU-6062 that should be fixed in 2.8 ( Lustre-Initialization-1: mount.lustre: mount luster-mdt1/mdt1 at /mnt/mds 1 failed: no such device. [root@isr-x4150-03 lcsw]# rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm error: Failed dependencies: libcom_err(x86-64) = 1.42.13.wc4-7.el7 is needed by e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64 e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-1.42.9-7.el7.x86_64 e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64 [root@isr-x4150-03 lcsw]# rpm -qa | grep e2 vte291-0.38.3-2.el7.x86_64 e2fsprogs-libs-1.42.9-7.el7.x86_64 graphite2-1.2.2-5.el7.x86_64 e2fsprogs-1.42.9-7.el7.x86_64 geoclue2-2.1.10-2.el7.x86_64 uname26-1.0-1.el7.x86_64 e2fsprogs-devel-1.42.9-7.el7.x86_64 libglade2-2.6.4-11.el7.x86_64 isorelax-0-0.15.release20050331.el7.noarch [root@isr-x4150-03 lcsw]# [root@isr-x4150-01 ~]# mount -t lustre /dev/sdb /lustre mount.lustre: mount /dev/sdb at /lustre failed: No such device Are the lustre modules loaded? Check /etc/modprobe.conf and /proc/filesystems Thanks Again.. HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Mannthey, Keith [mailto:[email protected]] Sent: Monday, May 23, 2016 12:26 PM To: Michael Skiba; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Are you trying to deploy Lustre servers or clients or both? I would suspect with a little work OUL 7.2 should work just fine with Lustre 2.8 and the Linux 3.10 based builds. Thanks, Keith From: lustre-discuss [mailto:[email protected]] On Behalf Of Michael Skiba Sent: Monday, May 23, 2016 11:05 AM To: Michael Skiba <HYPERLINK "mailto:[email protected]"[email protected]>; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Sorry for the second e-mail please use my work email. HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Michael Skiba Sent: Monday, May 23, 2016 11:49 AM To: HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: New Luster 2.8 Install Question Hi, I'm installing a new Lustre 2.8 filesystem and having some issue installing the e2fsprogs packages. Before I get into the details I would like to know if I can run Lustre 2.8 on 7.2 Oracle Unbreakable Linux using the Red Hat Compatible kernel. I changed the grub.conf file to boot in the Red Hat Compatible kernel. Any replies welcomed.
_______________________________________________ lustre-discuss mailing list [email protected] http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
