Malcolm, thanks that looks like it worked. I will finish the install tomorrow and let you know.
HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Cowe, Malcolm J [mailto:[email protected]] Sent: Monday, May 23, 2016 5:13 PM To: [email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question I'd probably look at removing the e2fsprogs-devel package from the base install, since this is the source of the conflict, or adding the e2fsprogs-devel package into the update list, e.g.: sudo rpm -Uvh e2fsprogs-* e2fsprogs-devel-?.* e2fsprogs-libs-?.* lib* e2fsprogs-devel should already be in the directory downloaded by wget. Malcolm Cowe High Performance Data Division +61 408 573 001 Intel Corporation | HYPERLINK "http://www.intel.com"www.intel.com From: Michael Skiba [mailto:[email protected]] Sent: Tuesday, May 24, 2016 9:04 AM To: Mannthey, Keith; Cowe, Malcolm J; HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: RE: [lustre-discuss] New Luster 2.8 Install Question Keith, here is the output same thing. [root@isr-x4150-03 lcsw]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib* e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm libcom_err-1.42.13.wc4-7.el7.x86_64.rpm libcom_err-devel-1.42.13.wc4-7.el7.x86_64.rpm libss-1.42.13.wc4-7.el7.x86_64.rpm libss-devel-1.42.13.wc4-7.el7.x86_64.rpm [root@isr-x4150-03 lcsw]# sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib* error: Failed dependencies: e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64 libcom_err-devel(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64 [root@isr-x4150-03 lcsw]# rpm -qa | grep libcom_err-devel libcom_err-devel-1.42.9-7.el7.x86_64 [root@isr-x4150-03 lcsw]# HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Mannthey, Keith [mailto:[email protected]] Sent: Monday, May 23, 2016 4:47 PM To: Michael Skiba; Cowe, Malcolm J; HYPERLINK "mailto:[email protected]"[email protected] Subject: RE: [lustre-discuss] New Luster 2.8 Install Question It seems to me your system has the *-devel packages installed. You will need to download the new devel packages and install them as well. https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/ I would recommend you grab new versions of the devel packages mentioned below. Thanks, Keith From: lustre-discuss [mailto:[email protected]] On Behalf Of Michael Skiba Sent: Monday, May 23, 2016 3:40 PM To: Cowe, Malcolm J <HYPERLINK "mailto:[email protected]"[email protected]>; HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Malcolm, here is my output same problem, remember I am running OUL 7.2 with Red Hat Compatible kernel. Will this work? [root@isr-x4150-03 lcsw]# ls e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm kernel-3.10.0-327.3.1.el7_lustre.x86_64.rpm libcom_err-1.42.13.wc4-7.el7.x86_64.rpm libss-1.42.13.wc4-7.el7.x86_64.rpm lustre-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm lustre-iokit-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm lustre-modules-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm lustre-osd-ldiskfs-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm lustre-osd-ldiskfs-mount-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm lustre-tests-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm [root@isr-x4150-03 lcsw]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib* e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm libcom_err-1.42.13.wc4-7.el7.x86_64.rpm libss-1.42.13.wc4-7.el7.x86_64.rpm [root@isr-x4150-03 lcsw]# sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib* error: Failed dependencies: e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64 libcom_err(x86-64) = 1.42.9-7.el7 is needed by (installed) libcom_err-devel-1.42.9-7.el7.x86_64 [root@isr-x4150-03 lcsw]# HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Cowe, Malcolm J [mailto:[email protected]] Sent: Monday, May 23, 2016 3:58 PM To: Michael Skiba; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question There are several RPMs that need to be installed together in order to update the e2fsprogs packages to the lustre version, which can be confusing when working with YUM and RPM. This is what I do to install the e2fsprogs RPMS: To download: cd $HOME wget -r -np https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/ cd $HOME/downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/ The packages of interest are: [root@rh7z-c3 x86_64]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib* e2fsprogs-1.42.13.wc5-7.el7.x86_64.rpm libcom_err-devel-1.42.13.wc5-7.el7.x86_64.rpm e2fsprogs-libs-1.42.13.wc5-7.el7.x86_64.rpm libss-1.42.13.wc5-7.el7.x86_64.rpm libcom_err-1.42.13.wc5-7.el7.x86_64.rpm libss-devel-1.42.13.wc5-7.el7.x86_64.rpm To install: sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib* (the -devel packages are optional, but I wanted to keep the command line simple :) ) Malcolm Cowe High Performance Data Division Intel Corporation | HYPERLINK "http://www.intel.com"www.intel.com From: lustre-discuss [mailto:[email protected]] On Behalf Of Michael Skiba Sent: Tuesday, May 24, 2016 7:04 AM To: Mannthey, Keith; HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Keith, thanks for the reply back, I am trying to set up a very basic configuration for a POC. Taking my information from the latest Lustre manual and a doc. written from Oak Ridge. The server is what I am working on and going to make it my MGS and MDS. Than make one of the internal drives my MDT. Then add the OSS and OST, than add a client. When I install the rpm ( rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm ) (below is the output in red). The dependence is already installed e2fsprogs-libs-1.42.9-7.el7.x86_64. The only way I get around installing this rpm is to run this yum command "yum install --setopt=protected_multilib=false" (not a good way). If I do this I can get the necessary packages to install. Once this is done I can configure my Lustre Filesystem; however when I mount my filesystem I get the output highlighted in yellow. So it looks like all packages did not load properly from running "yum install --setopt=protected_multilib=false". It also look like bug LU-6062 that should be fixed in 2.8 ( Lustre-Initialization-1: mount.lustre: mount luster-mdt1/mdt1 at /mnt/mds 1 failed: no such device. [root@isr-x4150-03 lcsw]# rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm error: Failed dependencies: libcom_err(x86-64) = 1.42.13.wc4-7.el7 is needed by e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64 e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-1.42.9-7.el7.x86_64 e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64 [root@isr-x4150-03 lcsw]# rpm -qa | grep e2 vte291-0.38.3-2.el7.x86_64 e2fsprogs-libs-1.42.9-7.el7.x86_64 graphite2-1.2.2-5.el7.x86_64 e2fsprogs-1.42.9-7.el7.x86_64 geoclue2-2.1.10-2.el7.x86_64 uname26-1.0-1.el7.x86_64 e2fsprogs-devel-1.42.9-7.el7.x86_64 libglade2-2.6.4-11.el7.x86_64 isorelax-0-0.15.release20050331.el7.noarch [root@isr-x4150-03 lcsw]# [root@isr-x4150-01 ~]# mount -t lustre /dev/sdb /lustre mount.lustre: mount /dev/sdb at /lustre failed: No such device Are the lustre modules loaded? Check /etc/modprobe.conf and /proc/filesystems Thanks Again.. HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Mannthey, Keith [mailto:[email protected]] Sent: Monday, May 23, 2016 12:26 PM To: Michael Skiba; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Are you trying to deploy Lustre servers or clients or both? I would suspect with a little work OUL 7.2 should work just fine with Lustre 2.8 and the Linux 3.10 based builds. Thanks, Keith From: lustre-discuss [mailto:[email protected]] On Behalf Of Michael Skiba Sent: Monday, May 23, 2016 11:05 AM To: Michael Skiba <HYPERLINK "mailto:[email protected]"[email protected]>; HYPERLINK "mailto:[email protected]"[email protected] Subject: Re: [lustre-discuss] New Luster 2.8 Install Question Sorry for the second e-mail please use my work email. HYPERLINK "http://www.oracle.com/"; \nOracle Michael J. Skiba | Principal Support Engineer Phone: HYPERLINK "tel:+1%203032729724"+1 3032729724 | Mobile: HYPERLINK "tel:+1%203036198495"+1 3036198495 Oracle ISV 500 Elorado Blv. Bldg. 5 Broomfield, Colorado 80021 HYPERLINK "http://www.oracle.com/commitment"; \nGreen Oracle Oracle is committed to developing practices and products that help protect the environment From: Michael Skiba Sent: Monday, May 23, 2016 11:49 AM To: HYPERLINK "mailto:[email protected]"[email protected]; HYPERLINK "mailto:[email protected]"[email protected] Subject: New Luster 2.8 Install Question Hi, I'm installing a new Lustre 2.8 filesystem and having some issue installing the e2fsprogs packages. Before I get into the details I would like to know if I can run Lustre 2.8 on 7.2 Oracle Unbreakable Linux using the Red Hat Compatible kernel. I changed the grub.conf file to boot in the Red Hat Compatible kernel. Any replies welcomed.
_______________________________________________ lustre-discuss mailing list [email protected] http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
