Hello Thomas, Thank you for the vote of confidence. It is always a pleasure to hear from you. When adjusting a peg, I recomend to proceed slowly and not try to make large, sudden changes. If using sand paper, I would not only fine grit, such as finer than 250, or even 400, finishing off with 600 or 1200 if you can find it. If a small adjustment will fix the problem there is no need for anything more.
Best regards, Marion Mezzosoprano, musica del rinascimento -----Original Message----- From: [EMAIL PROTECTED] Sent: May 12, 2005 11:59 PM To: [email protected] Subject: Antwort: Re: lute string? Hi all I would second Marion's recommendation. In most cases a bit of graphit will help. Another problem could be the pegs itself: They should be round and move smoothly. If they are not they will stick a bit in the pegbox and when turned make a farer move than you want them to. In this case the pegs would need to be adjusted (which is not a big deal - you could even do it yourself if you should be bold enough). Best wishes Thomas "Dr. Marion Ceruti" <[EMAIL PROTECTED]> am 13.05.2005 06:15:05 Bitte antworten an "Dr. Marion Ceruti" <[EMAIL PROTECTED]> An: Derek Monahan <[EMAIL PROTECTED]>, [email protected] Kopie: Thema: Re: lute string? Dear Derek, Don't you just hate that creaking sound? Welcome to the wonderful world of non-linear peg tuning on pegbox lutes. Your problem is not confined to cheap lutes. I have had the same problem on both my cheap lute (which is actually much better than the average lute for the price) and my concert renaissance lute. At least for now, the problem on my lutes appears to be solved in the following manner. While the string is still under tension, I mark with a pencil where it touches the nut. Then I make the string sack and I put some on graphite from the pencil on the string where it touches the nut and also in the groove of the nut. I put the graphite on about a 1cm.-long segment of the string and all around it because the string moves when you tighten it and the place where the string originally touches the nut can shift when the tension is fully applied. It may take a couple of tries to get enough graphite to stay exactly where you need it - where the string touches the nut - but you should notice quite a bit better linearity in your tuning. At least I can say that this method has worked for me. If you still have the same problems you may want to take a close look at the grooves in the nut. They should be round and not 'v' shaped. The string can get caught on the nut at the 'v' and graphite may not be enough to correct the problem. In this case, you may need to file the grooves with a very small round file or better yet, replace the nut. Cheap lutes often have other problems with the nuts, such as string spacings. If this is the case you may want to repalce the nut anyway or at least reposition a few of the strings, as needed. BTW, I **never** have had this problem on my swan-neck baroque lute, only on the peg-box lutes with the angles at the nut. If you get a baroque lute, I recommend the swan-neck variety for this reason. I'm not sure why but I think they look better too, for some reason. Maybe I have associated their looks with not having so many tuning hassles with them. (Beauty is in the eye and ear of the beholder.) So tell me, Derek, what kind of lute music do you like? I like lute songs, but only the clean ones. Good luck to you and let us know how how you are doing from time to time. Best regards, Marion ***MEZZOSOPRANO*** -----Original Message----- From: Derek Monahan <[EMAIL PROTECTED]> Sent: May 12, 2005 5:37 PM To: [email protected] Subject: lute string? I just bought a very cheap Renaissance lute. Tuning it is a real problem. For instance, a string will be just a little flat. I'll turn the peg with no response, then all of a sudden it jumps up a half-step (this is often accompanied by an ominous creaking sound). Is this just because it's a cheap lute? Any sugggestions? www.myspace.com/deflatormouse __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium.
