Thanks Anthony, very good advice!



2008/5/11 Anthony Hind <[EMAIL PROTECTED]>:

> Lundberg in his Historical Lute Construction says the following.
>
> "The eight frets on a Renaissance lute are generally arranged so that they
> descend in diameter towards the body. I would typically use the following
> diameters:
>
> Fret 1  1.00mm
> Fret 2   0.90mm
> Fret 3- 0.85mm
> Fret 4  0,82mm
> Fret 5- 0.79mm
> Fret 6- 0.76mm
> Fret 7- 0.73mm
> Fret 8- 0.70mm
>
> However, gut varies, so don't worry about being really exact. The main
> points to consider are that the first fret shoudl be large, the second fret
> should drop considerably in diameter, and each of the rest should be about
> .03mm smaller than the preceding.
>        If the lute has a very high action, that is, if the height of the
> strings above the fingerboard at the neck/body join is, for example, in the
> vicinity of 5mm, then it would be better to tie on frets of a more constant
> size or even the same size. If on the other hand, the action is low, then a
> larger 1st fret together with a bigger drop between frets and ending with a
> .66mm might help."
>
> This book is well worth having for its very reasonable price.
> Regards
> Anthony
>
>
>
>
> Le 11 mai 08 =E0 05:17, Bruno Correia a ecrit :
>
>   With so many gauges fretting the lute become quite expensive... What
>> about
>> using te same gauge from the 4th until the last? Would you have a photo
>> from
>> your lute with the fretting described below? I wish I could see it to try
>> myself.
>>
>> Thanks.
>>
>>
>>
>> 2008/5/10 The Other <[EMAIL PROTECTED]>:
>>
>> Using Thomas Mace's method of tying double frets; locking forceps to
>>> pull the frets tight enough; Dan Larson fret gut; in One Quarter Comma
>>> Meantone Temperament, with two 1st frets instead of using a tastini.
>>>
>>> Fret 1a (peg box side)- 1.00mm
>>> Fret 1b (bridge side)- 0.95mm
>>> Fret 2- 0.95mm  (yes, same size as Fret 1b)
>>> Fret 3- 0.90mm
>>> Fret 4- 0.85mm
>>> Fret 5- 0.80mm
>>> Fret 6- 0.75mm
>>> Fret 7- 0.70mm
>>> Fret 8- 0.65mm
>>>
>>> No buzzing.
>>>
>>> Regards,
>>> "The Other" Stephen Stubbs.
>>>
>>>
>>>
>>>
>> --
>>
>> To get on or off this list see list information at
>> http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
>>
>
>

--

Reply via email to