Hi All,
I recommend Daniel's solution with a piece of dowel, because the pin vice
may be too thick to allow you to rotate it without contacting the soundboard
(if you have enough room, fine, but put a piece of masking tape on the
soundboard first so if you do make contact you don't scratch it). The drill
needs to be comfortably larger than the string you intend to use.
Please, luthiers, drill your holes big enough in the first place!
Pegs are not such a worry as enlarging the holes is not so difficult and it
can be inconvenient if the holes are too large for the string you're using.
Best wishes,
Martin
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
To get on or off this list see list information at
http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
