What are you using to get those metrics? On Tuesday, 26 March 2013, James Harper wrote:
> I have a netgear wndr3800 running OpenWRT aa rc1. The wndr3800 has gigabit > ports but the most I can get through it with iperf is an average of around > 80mbits/second (varying between 30 and 150). Because I can regularly see > over 100 I can confirm that the ports are gigabit connected. > > It's configured such that port 1 is on a 192.168.0.0/24 network and port > 2 is on 10.1.0.0/16 network and it routes between the two. > > I don't expect to get gigabit performance or anything out of it, it's only > a little CPU after all, I'm just wondering if there are any tricks I can > use to get a bit of extra boost out of it (software tricks - not interested > in overclocking). > > It's also an internet gateway so needs to run iptables. I tried using the > notrack target for packets between the two networks but then performance > dropped to under 20mbits/second. > > Any suggestions? > > Thanks > > James > _______________________________________________ > luv-main mailing list > [email protected] <javascript:;> > http://lists.luv.asn.au/listinfo/luv-main > -- *Michael Lindner* IT Systems Consultant _______________________________________ Tel: +61 3 9016 8931 Fax: +61 3 8648 5882 Mobile: +61 4 3888 8499 [email protected] PO Box 422 St Kilda Victoria 3182 Australia www.mikelindner.com "It's always now"
_______________________________________________ luv-main mailing list [email protected] http://lists.luv.asn.au/listinfo/luv-main
