Scrap that. On Tuesday, 26 March 2013, Michael Lindner wrote:
> What are you using to get those metrics? > > On Tuesday, 26 March 2013, James Harper wrote: > >> I have a netgear wndr3800 running OpenWRT aa rc1. The wndr3800 has >> gigabit ports but the most I can get through it with iperf is an average of >> around 80mbits/second (varying between 30 and 150). Because I can regularly >> see over 100 I can confirm that the ports are gigabit connected. >> >> It's configured such that port 1 is on a 192.168.0.0/24 network and port >> 2 is on 10.1.0.0/16 network and it routes between the two. >> >> I don't expect to get gigabit performance or anything out of it, it's >> only a little CPU after all, I'm just wondering if there are any tricks I >> can use to get a bit of extra boost out of it (software tricks - not >> interested in overclocking). >> >> It's also an internet gateway so needs to run iptables. I tried using the >> notrack target for packets between the two networks but then performance >> dropped to under 20mbits/second. >> >> Any suggestions? >> >> Thanks >> >> James >> _______________________________________________ >> luv-main mailing list >> [email protected] >> http://lists.luv.asn.au/listinfo/luv-main >> > > > -- > *Michael Lindner* > IT Systems Consultant > _______________________________________ > > Tel: +61 3 9016 8931 Fax: +61 3 8648 5882 Mobile: +61 4 3888 8499 > > [email protected] <javascript:_e({}, 'cvml', '[email protected]');> > > PO Box 422 St Kilda Victoria 3182 Australia > www.mikelindner.com > > "It's always now" > > -- *Michael Lindner* IT Systems Consultant _______________________________________ Tel: +61 3 9016 8931 Fax: +61 3 8648 5882 Mobile: +61 4 3888 8499 [email protected] PO Box 422 St Kilda Victoria 3182 Australia www.mikelindner.com "It's always now"
_______________________________________________ luv-main mailing list [email protected] http://lists.luv.asn.au/listinfo/luv-main
