Hi! I installed Ultra Monkey for load-balancing purposes (on a RHEL4). I followed the instruction on the UM site. I did the following already:
1. installed UM on the director; modified the sysctl file and updated the ldirectord.cf (1 director and 2 nodes) 2. based on the ipvsadm -L -n, it shows both the nodes' IP addresses and the virtual's as well. 3. also, the polling of the nodes are okay based on the tcpdump result (nodes would return 200 status to the requests of the director) 4. i turned on the apache on all of the nodes and the director; however, for the director, i configured the httpd.conf to listen to the loopback only (for the fallback parameter of the ldirectord.cf). 5. connectivity to the outside network of the nodes are okay (iptables have been configured to allow nodes to connect to the external network) After several tests, the director doesn't route requests coming from the virtual IP to the nodes. tcpdump is not taking any packets from the virtual address on port 80. the director doesn't reroute traffic to the loopback address when connection to the nodes fails (as per fallback parameter would instruct). According to a debian site, I need to modify the sysctl of the nodes, which I did. Nothing happened. I checked several sites already, and there's nothing much to do in the director or the ldirectord.cf file, unless the implementation is load-balancing and high-availability (which isn't the case here). Any help is appreciated. Thanks. -- Regards, Maverik --------------------- "Ability is what you're capable of doing... Motivation determines what you do... Attitude determines how well you do it." _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://www.in-addr.de/mailman/listinfo/lvs-users
