I am not implementing HA, just the LVS. And this is where I am stuck! I followed the instructions on the UM site to no avail.
I configurred the syslogd to record the ldirector log to /var/log/ldirectord.log. It did only once and reflected a status 2, error in configuration. I tried to check again the ldirectord.cf and restarted the daemon, this time no indication of errors on the /var/log/ldirectord.log and /var/log/messages. The daemon started okay. When I do nmap on the virtual IP, there's no available service for HTTP. Is this normal? Thanks. On 4/20/07, Joseph Mack NA3T <[EMAIL PROTECTED]> wrote:
On Fri, 20 Apr 2007, Maverik wrote: > After several tests, the director doesn't route requests coming from the > virtual IP to the nodes. tcpdump is not taking any packets from the virtual > address on port 80. the director doesn't reroute traffic to the loopback > address when connection to the nodes fails (as per fallback parameter would > instruct). Ultramonkey is a big package. I would be surprised if you could install it from scratch and get it to work without extensive checking on the way. First get the LVS part to work, and then get the HA part to work Joe -- Joseph Mack NA3T EME(B,D), FM05lw North Carolina jmack (at) wm7d (dot) net - azimuthal equidistant map generator at http://www.wm7d.net/azproj.shtml Homepage http://www.austintek.com/ It's GNU/Linux! _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://www.in-addr.de/mailman/listinfo/lvs-users
-- Regards, Maenard --------------------- "Ability is what you're capable of doing... Motivation determines what you do... Attitude determines how well you do it." _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://www.in-addr.de/mailman/listinfo/lvs-users
