Hi Emilio, I would like to help you, but you are not giving a lot of information. I always supply a quick ascii drawing of my setup, maybe something like:
client-host (10.0.0.10/24) ---- (10.0.0.1/24) lvs-server (192.168.0.1/24) ---- (192.168.0.10/24) real-server If you state the output of 'ipvsadm -ln' we know what your lvs is doing. Including your keepalived config might also help a bit. When you have given your setup, say what you expect and what you experience. That's more practical to troubleshoot for me at least. With kind regards, Tom van Leeuwen ------------------------------------------------------------------------ This e-mail is intended exclusively for the addressee(s), and may not be passed on to, or made available for use by any person other than the addressee(s). SaaSplaza rules out any and every liability resulting from any electronic transmission. ------------------------------------------------------------------------ signature_card On 06/02/2011 09:56 AM, Emilio Campos wrote: > Hi to everybody, I am new user with LVS, I just readed the entire > documentation of lvs on the official web, and I configured some > examples, but didnt work, I am trying configure LVS-NAT with ipvsadm > and keepalived, but this don't work for me, I can connect on virtual > port from server where lvs is running , but I can't connect to virtual > port from client node, and I configured port forwarding on /proc > > Would you send me reference to some web, mails, etc for read and > configure examples, I am sure that some is bad on my configuration. > I am working with kernel 2.6.32 > > Any information for understand the LVS philosophy will be welcomed > > Thanks! > _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
