Hi Tom, thanks about your reply, and thanks about your help, is useful for me. I cant add some keepalive configuration or ipvsadmin because I tried a lot of, with nothing clearly, but I can explain a general example about my architecture
client (192.168.1.0/24) ----- lvs (192.168.1.100/24) ------ real-server (192.168.1.0/24) all members in the same network I am reading and understanding the lvs functionalytie, and reading about LVS-NAT on the same networking. ON other case this could be my architecture: client (0.0.0.0/0) ----- lvs (192.168.1.100/24) ------ real-server (192.168.1.0/24) never my load balancer (lvs) will work like a gateway, because this service is now working with other product. I readed a lot of examples with lvs like a gateway, is this the only way that lvs works? Thanks 2011/6/2 Tom van Leeuwen <[email protected]>: > Hi Emilio, > > I would like to help you, but you are not giving a lot of information. > I always supply a quick ascii drawing of my setup, maybe something like: > > client-host (10.0.0.10/24) ---- (10.0.0.1/24) lvs-server > (192.168.0.1/24) ---- (192.168.0.10/24) real-server > If you state the output of 'ipvsadm -ln' we know what your lvs is doing. > > Including your keepalived config might also help a bit. > > When you have given your setup, say what you expect and what you > experience. That's more practical to troubleshoot for me at least. > > With kind regards, > Tom van Leeuwen > ------------------------------------------------------------------------ > This e-mail is intended exclusively for the addressee(s), and may not be > passed on to, or made available for use by any person other than the > addressee(s). SaaSplaza rules out any and every liability resulting from > any electronic transmission. > ------------------------------------------------------------------------ > > signature_card > > On 06/02/2011 09:56 AM, Emilio Campos wrote: >> Hi to everybody, I am new user with LVS, I just readed the entire >> documentation of lvs on the official web, and I configured some >> examples, but didnt work, I am trying configure LVS-NAT with ipvsadm >> and keepalived, but this don't work for me, I can connect on virtual >> port from server where lvs is running , but I can't connect to virtual >> port from client node, and I configured port forwarding on /proc >> >> Would you send me reference to some web, mails, etc for read and >> configure examples, I am sure that some is bad on my configuration. >> I am working with kernel 2.6.32 >> >> Any information for understand the LVS philosophy will be welcomed >> >> Thanks! >> > _______________________________________________ > Please read the documentation before posting - it's available at: > http://www.linuxvirtualserver.org/ > > LinuxVirtualServer.org mailing list - [email protected] > Send requests to [email protected] > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > -- Load balancer distribution - Open Source Project http://zenloadbalancer.sourceforge.net Distribution list (subscribe): [email protected] _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
