from the log the major problem is after CHAP success. Request peer address, and got a fcs error. ####################### pppInProc[0]: got 10 bytes pppInput[0]: IPCP len=4 fsm_input(IPCP):1,0,4 fsm_rconfreq(IPCP): Rcvd id 0 state=6 (LS_REQSENT) ipcp_reqci: Requesting peer address ipcp_reqci: returning Configure-NAK pppWrite[0]: len=18 Written 18 bytes: 7e ff 03 80 21 03 00 00 0a 03 06 00 00 00 00 a0 ~...!........... 3d 7e =~
fsm_sdata(IPCP): Sent code 3,0,10. Read 29 bytes: 7e 80 21 03 01 00 16 03 06 0d 0a 44 09 82 81 06 ~.!........D.... d3 88 70 32 83 06 d3 88 14 cb bc a0 7e ..p2........~ pppInProc[0]: got 29 bytes pppInProc[0]: Dropping bad fcs 0xAD6A proto=0x8021 ######################### ######################### fsm_sdata(IPCP): Sent code 1,2,14. IPCP: sending Configure-Request, id 2 Read 21 bytes: 7e 80 21 04 02 00 0e 01 0d 0a 00 00 00 00 00 00 ~.!............. 00 00 66 f7 7e ..f.~ pppInProc[0]: got 21 bytes pppInProc[0]: Dropping bad fcs 0xFC02 proto=0x8021 ######################### I got many 29 and 21 bytes fcs error. How could I confirm this is really FCS error, or some other protocol ? Lee
_______________________________________________ lwip-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/lwip-users
