Ok, now I took a design from xilinx with all the necessary interrupt
stuff, etc. and I think it should work now, but it doesn't. It's all the
same like before. The tcp_connect function doesn't seem to call the
callback function, and the transfer_data function will be called several
times but than it's sticking (I added a simple print command to check,
to where it runs).
Marianovich, Andre schrieb:
I already suspect that but till now nobody could help me so far in the
official support forums from xilinx.
However, thanks for your help. Maybe someone's here with some xilinx
experiences too.
Kieran Mansley schrieb:
On Fri, 2010-03-19 at 14:16 +0100, Marianovich, Andre wrote:
Well, I made some test with wireshark and there was not a single bit
sent from the board.
Apart from that the Xilinx documents says that raw api needs
interrupts and maybe I have to trace something more in that way.
However, if
there are some more hints tell me please.
It sounds like you need some help from Xilinx, or someone who
understands that setup, to get it properly integrated into your hardware
project. I don't have any experience of that, so can't help, but there
may be others on the list who have used the same hardware and Xilinx
port of lwIP who may be able to offer advice.
Kieran
_______________________________________________
lwip-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________
lwip-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________
lwip-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/lwip-users
