It doesn't work in my case (Lyx 2.1.3), there is no such button when the
pane is undocked.

When I looked in my registry (I'm using the Windows version during the
week-end) I found the following values for what seems to me related to the
panes Progress and Source :

[HKEY_CURRENT_USER\Software\LyX\LyX2.1\views\0\progress]
"geometry"=hex:40,00,42,00,79,00,74,00,65,00,41,00,72,00,72,00,61,00,79,00,28,00,01,00,d9,00,d0,00,cb,00,00,00,01,00,00,00,00,00,ff,00,ff,00,fc,00,cf,00,ff,00,ff,00,fb,00,76,00,ff,00,ff,00,fe,00,0b,00,ff,00,ff,00,fe,00,0b,00,ff,00,ff,00,fc,00,cf,00,ff,00,ff,00,fb,00,76,00,ff,00,ff,00,fe,00,0b,00,ff,00,ff,00,fe,00,0b,00,ff,00,ff,00,ff,00,ff,00,00,00,00,00,29,00
"autoclear"="true"
"statusbarmsgs"="true"

[HKEY_CURRENT_USER\Software\LyX\LyX2.1\views\0\view-source]
"geometry"=hex:40,00,42,00,79,00,74,00,65,00,41,00,72,00,72,00,61,00,79,00,28,00,01,00,d9,00,d0,00,cb,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,00,01,00,00,00,00,00,05,00,55,00,00,00,00,00,02,00,da,00,00,00,00,00,00,00,00,00,00,00,00,00,02,00,01,00,00,00,00,00,05,00,55,00,00,00,00,00,02,00,da,00,00,00,00,00,00,00,00,00,00,00,00,00,29,00
"autoupdate"="true"

Do you know where are the original values for the "geometry" fields in
order to restore the 2 panes in their original state?

Thanks in advance,

Gilles



_______________________
Gilles Moyse
Mobile : +33 6 38 03 71 63

On 18 July 2015 at 08:22, Liviu Andronic <landronim...@gmail.com> wrote:

> On Sat, Jul 18, 2015 at 7:44 AM, Gilles Moyse <gilles.mo...@gmail.com>
> wrote:
> > I tried that but it only undocks the pane. What I would like to do is
> >
> Try it when pane is already undocked. Here it docks it back...
> Liviu
>
>
> > restore the original layout where the bottom of the screen is made of one
> > block containing the source pane on the left and the message pane on the
> > right.
> >
> > Gilles
> >
> > _______________________
> > Gilles Moyse
> > Mobile : +33 6 38 03 71 63
> >
> > On 18 July 2015 at 02:25, Liviu Andronic <landronim...@gmail.com> wrote:
> >>
> >> On Fri, Jul 17, 2015 at 11:52 AM, Gilles Moyse <gilles.mo...@gmail.com>
> >> wrote:
> >> > Dear all,
> >> >
> >> > I cannot find a way to restore the original side by side layout of the
> >> > Source and Progress panes in Lyx. If I mistakenly move one of those, I
> >> > cannot dock it back to its original position, I can only add it as a
> >> > tab,
> >> > thus preventing to have both views at once.
> >> >
> >> Have you tried clicking on the button next to close that
> >> docks/undocks? Here it restores side by side positioning.
> >>
> >> Liviu
> >>
> >>
> >> > In this thread, I learnt that the configuration file storing the
> panes'
> >> > locations parameters was the Registry in Windows and
> >> > ~/.config/Lyx/lyx.conf
> >> > in Linux.
> >> >
> >> > Unfortunately, this data is not easily editable since it is stored in
> >> > some
> >> > kind of hexadecimal format. Since what I'd like is restoring the
> >> > original
> >> > panes' layout, do you know where can I find the original lyx.conf file
> >> > so as
> >> > to restore their values in the appropriate fields (1\progress\geometry
> >> > and
> >> > 1\view-source\geometry) ?
> >> >
> >> > Thanks in advance,
> >> >
> >> > Gilles
> >>
> >>
> >>
> >> --
> >> Do you think you know what math is?
> >> http://www.ideasroadshow.com/issues/ian-stewart-2013-08-02
> >> Or what it means to be intelligent?
> >> http://www.ideasroadshow.com/issues/john-duncan-2013-08-30
> >> Think again:
> >> http://www.ideasroadshow.com/library
> >
> >
>
>
>
> --
> Do you think you know what math is?
> http://www.ideasroadshow.com/issues/ian-stewart-2013-08-02
> Or what it means to be intelligent?
> http://www.ideasroadshow.com/issues/john-duncan-2013-08-30
> Think again:
> http://www.ideasroadshow.com/library
>

Reply via email to