Confirmed! Thank you so much. :-) Your solution works perfectly.
Thanks again
Steve
--
Steve Litt
Webmaster, Troubleshooters.Com
http://www.troubleshooters.com
[EMAIL PROTECTED]
(Legal Disclaimer) Follow these suggestions at your own risk.
On Thursday 16 August 2001 06:40, Dekel Tsur wrote:
> On Wed, Aug 15, 2001 at 08:57:25PM -0400, Steve Litt wrote:
> > I want about .75in on the outside edge and about 2.0" on the inside edge.
> > When I set the margins to get .75 on the outside, I get only about 1.25"
> > on the inside edge.
> >
> > I staple my books together, and that consumes about 1 extra inch on the
> > inside.
>
> 1. Open document dialog and go to the paper tab.
> 2. Select the "use geometry" button
> 3. Put 2in in the left margin field, and 0.75in in the right margin field.
> 4. Goto the document tab, and select the "two sides" button.
