Thanks to Bob Scott for answering my question so rapidly,using the official power adpaters for the NEC models.r
From: [email protected] To: [email protected] Date: Mon, 30 Mar 2015 13:46:55 -0700 Subject: Re: [M100] List archives/ NEC power question The item I was searching for (but did not find, perhapeth bcuz I'm lazy)was power requirements for the NEC models.Just bought a couple off ebay (have not arrived yet) and the picturesof the sticker on the bottom of the unit LOOKSlike it says 6v @ 800mw. round that up to 1watt, convert to ma, and my math says at 6v, it needs around 160ma,or, based on the power requirement of the 8.5V listed at the DC jack, 120ma,rounding up again. I know this has been discussed before. is a 9VDC @300maadapter sufficent, (400ma-6V is on the tandy models), or do I need an 500ma/800ma supply?I think I'm right, (9VDC@300 is plenty)but getting other opinions helps increase the accuracy.ray From: [email protected] To: [email protected] Date: Mon, 30 Mar 2015 13:34:47 -0700 Subject: Re: [M100] List archives are searchable now Just dropped by to do a search on the archives, and it seems to work as advertised, but not 100% sure.interesting, just as i needed to search the archives, John posts a message about doing just that.interesting psychic connection. > Date: Thu, 19 Mar 2015 15:39:08 -0700 > From: [email protected] > To: [email protected] > Subject: [M100] List archives are searchable now > > My web host support just let me know that the list archives are searchable. > > http://lists.bitchin100.com/private.cgi/m100-bitchin100.com/ > > You need to log in with your Bitchin100 email address and password. > > If you have forgotten it there's a "remind me of my password" link at > the bottom of the page. > > > As I mentioned the other day, the list is also currently being > subscribed to by Gmane, so for very old and very new posts you can > browse or search there. > > Eventually we'll get the missing years added to the Gmane archive as > well and you'll be able to search the full history. > > Cheers, > > -- John.
