Hi Mark I'm not sure if anyone has mentioned this yet. But as a fellow UK M100 user, I thought it best to mention that I've had some difficulties getting the REX to work with my EU model 100. I recent discovered my machines was very different to the ones the guys have across the pond. I'm still pretty new to the M100 and Stephen has been doing his best to get me up and running with my REX without much success.
Wouldn't want to see you face the same problems as I have James Sent from my iPad > On 25 May 2015, at 8:43 pm, Mark Wickens <[email protected]> wrote: > > Hi Steve > > Thanks for the reply. > > Regards, Mark. > >> On 25/05/15 15:01, Stephen Adolph wrote: >> Mark, >> Bluetooth does work, but it has some different behaviors from a cable >> obviously. It gets marketed as "cable replacement" but really, it can't >> emulate a cable. It is a radio. It buffers, it has a retransmission >> protocol etc. >> I think it is reasonable to get a commercial Rs-232 to bluetooth module. I >> would recommend that you get one that supports both XON XOFF and hardware >> flow control, to cover all situations. >> Steve >> >> >> >>> On Wed, May 20, 2015 at 5:51 PM, Mark Wickens <[email protected]> >>> wrote: >>> Hi >>> >>> Just a quick question, and an introduction - I've been looking for a Model >>> 100/102 for ages in decent condition and was fortunate enough to pick one >>> up in the UK recently - as it happens it was being sold by a charity in >>> Kendal which is only 20 minutes from where I live. >>> >>> My questions are: >>> >>> 1. Is the club100 ordering page still active? I'm toying with the idea of >>> ordering a Rex. >>> 2. Does anyone have any experience/has anyone implemented an internal >>> bluetooth serial adapter for the 100/102? I'm strugging to get my current >>> serial lead to work above around 1200 baud. I can try a new cable, but I'd >>> rather go wireless if that is possible and reliable. >>> >>> Many thanks, Mark. >
