IIRC normally one must save their BA files as a DO file before transferring it from or to your Model 100.
On Sat, Jun 13, 2015 at 12:31 PM, mechanicalgenius <mechanicalgen...@cox.net > wrote: > Good morning folks > > So, I just installed a TS-DOS ROM in my M100. I have laddiealpha running > on a Vista laptop. I have a Prolific Usb-serial converter running on com1, > 9600, 8n1, no flow control. Null modem adapter inline with an rs-232 tester > plugged into the serial port on the M100. > > Once in a while I can connect to the pc from TS-DOS, and transfer files, > however the .BA files that transfer won't run. I get a syntax error in the > first line, and that line is always corrupt. While in basic, when I > execute the list command, it invariably shows only the first line, which > is combined with a couple other of the first lines of code. Also, when I > look at the directory on the pc while I'm in TS-DOS, all the .BA files show > .DB. In Windows, they show .BA. > > Other times, the two machines just won't connect. Laddiealpha shows hex > characters when I try to connect from TS-DOS. I get a connection error > often. When I cold boot and re-call TS-DOS, it usually works. > > Now the big question, what could I be doing wrong to be so close, yet not > quite there? > > Robert > -- *"I will never in my lifetime make a film that cannot be seen by the whole family"* Arther P. Jacobs