M100 is tolerant of 5V.  the LED comes on at about 4.3 V or so.
Between TPDD and M100, I think the TPDD uses more current (I have to
believe so).  M100 is around 70 mA typical.
I think a 500mA USB supply is sufficient though for both uses.  Most
cell chargers are in that range.

On Sat, Apr 23, 2016 at 5:30 AM, James Zeun <[email protected]> wrote:
> But I thought USB was 5v and the M100 was 6?
>
> On 23 Apr 2016 6:44 a.m., "Donald Kyllo" <[email protected]> wrote:
>>
>> I guess I should have mentioned why I said that.  If your USB power source
>> can handle 400 mA or more, it should work fine with the M100s.  It sounds
>> like it depends on whether your USB source can "see" such a low load.  Thank
>> you for that info.
>>
>>
>> On 04/22/2016 08:01 PM, Bogdan Macri wrote:
>>>
>>> 400mA is max sustained output.  That does not mean that your computer
>>> will draw that much current.
>>>
>>> I tried using my USB power cable with a 12,000 mAh power bank, but the
>>> current draw was to low and the power bank would not activate... pity...
>>>
>>> Bottom line is that the USB power cable can be used with any USB device
>>> on a laptop/USB wall wart and the current draw should be within the USB
>>> standard spec.
>>>
>>>
>>> -----Original Message-----
>>> From: M100 [mailto:[email protected]] On Behalf Of Donald
>>> Kyllo
>>> Sent: Friday, April 22, 2016 16:09
>>> To: Model 100 Discussion <[email protected]>
>>> Subject: Re: [M100] General PSU question
>>>
>>> My 102 and 200 wall warts say 6V 400 mA output.
>>>
>>>
>>> On 04/22/2016 05:35 AM, Joseph Remy wrote:
>>>>
>>>> The back of my M102 says (6V 1.2W)
>>>>
>>>> Online calculator says that would be 0.2 Amps.
>>>>
>>>> Which is a heck of a lot less then the power source I picked up.
>>>>
>>>> On Fri, Apr 22, 2016 at 6:00 AM, James Zeun <[email protected]>
>>>> wrote:
>>>>>
>>>>> I thought I was 1amp
>>>>>
>>>>> On 22 Apr 2016 10:57 a.m., "Jan-80" <[email protected]> wrote:
>>>>>>
>>>>>> That means we can use our Model T, powered bij a general-purpose USB
>>>>>> wall-wart? (using that or a similar cable)
>>>>>>
>>>>>> That means we can power our model T from our laptop ?
>>>>>>
>>>>>> As I work in an IT-dept., I have an un-ending source of broken
>>>>>> USB-equipment (keyboards, mice, ...) I can cut off cables from.
>>>>>>
>>>>>> Isn't the spec for a Model T power adapter 6V, 500 mA ? I should
>>>>>> check my original PS...
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, 21 Apr 2016 21:10:19 -0700, Bogdan Macri wrote:
>>>>>>
>>>>>> The adapter comes with an inline extender that swaps polarity.  Just
>>>>>> don't use it on our portable family of devices.
>>>>>>
>>>>>> Sent from my mobile device
>>>>>>
>>>>>> On Apr 21, 2016, at 19:34, Donald Kyllo <[email protected]> wrote:
>>>>>>
>>>>>> Nice cable!  What kind of adapter do you use to swap the polarity?
>>>>>>
>>>>>> I know the computer guys at a hospital computer department so I
>>>>>> asked if they had any broken keyboards.  I got one, cut off the
>>>>>> cable, bought a plug at Radio Shack and soldered it on.  It's not as
>>>>>> nice looking as the Amazon cable but it works.  I'm sure any large
>>>>>> business or computer repair place would be able to give you a
>>>>>> keyboard or mouse cable.  However, for $10, the Amazon cable is a good
>>>>>> deal.  I might buy one myself.
>>>>>>
>>>>>> I'm wondering how long a USB rechargeable battery would power an
>>>>>> M100.  It might be something to check out.  I know a 6 volt lantern
>>>>>> battery will power an M100 for a week with continuous use.
>>>>>>
>>>>>> On 04/20/2016 05:11 PM, Bogdan Macri wrote:
>>>>>>
>>>>>> I also have a USB to 6V reversed polarity with the normal polarity
>>>>>> adapter
>>>>>> cable:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://www.amazon.com/power-cable-Creative-70EM779006000-part/dp/B00
>>>>>> H01VGTQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
>>>>>>
>>>>>>
>>>>>>
>>>>>> I think it came from the UK and it took a fair bit of time to arrive.
>>>>>>
>>>>>>
>>>>>>
>>>>>> It works fine with the 102/200/8300…
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Greetings from the TyRannoSaurus
>>>>>> Jan-80
>>>
>>>
>>
>

Reply via email to