Yeah those pins I posted were only for a special situation where you needed both round and low profile. On Jun 16, 2016 4:52 PM, "Stephen Adolph" <[email protected]> wrote:
> thanks for the offer, a write up on bitchin100 would be great! > > > http://www.ebay.com/itm/5x-40-pin-1-row-0-1-PCB-Male-Machined-Round-Header-DE1557-/310891410876?hash=item48629275bc:g:Fz0AAOSw-jhUHNTp > > these would work for pins.. > > > > On Thu, Jun 16, 2016 at 4:14 PM, Atsushi Takahashi <[email protected]> > wrote: > > Dear Steve, > > > > I’m excited that you released the QUAD PC board! I’m a new Model 100 > owner > > with a long history going back to the S-100 bus days. Most of the > components > > on the board are in the photo on the QUAD web page but I was wondering > what > > capacitors and resistor values are needed: 0.1uF bypass caps? 10k > pull-up? > > > > This looks like the rest: > > 74AC02 (Quad 2 input NOR gate) > > 74AC74 (dual flip flop) > > 74AC573 (8 bit latch) > > TC551001AFTL-10L (memory) > > BAV70 (pair of diodes) > > > > Will the machined pins someone posted a few weeks ago work? > > http://www.king-cart.com/phoenixent/product_name=HWS5231 > > > > If I successfully build one, I’ll write up instructions so you can post > them > > on your site (if you want)... > > > > Atsushi > > > > > > > > > > On Jun 16, 2016, at 3:18 PM, Brian White <[email protected]> wrote: > > > > What, the rex 4 boards? Don't worry about that. Unless you actually want > > them for something? I'll mail them to you just a favor if you have some > use > > for them, but I don't care about the $6. > > > > I don't have them yet. Probably another week. > > > > -- > > bkw > > > > On Jun 16, 2016 12:29 PM, "Stephen Adolph" <[email protected]> wrote: > >> > >> I can buy those from you. > >> > >> On Thu, Jun 16, 2016 at 12:29 PM, Stephen Adolph <[email protected]> > >> wrote: > >> > sorry... > >> > > >> > On Thu, Jun 16, 2016 at 12:26 PM, Brian White <[email protected]> > >> > wrote: > >> >> Thanks for the heads up. I hadn't bought any other parts yet and the > >> >> boards > >> >> themselves are only $6 for 3. No big. > >> >> > >> >> -- > >> >> bkw > > > > >
