I just noticed I was doing 2 things completely bone-headed before. I was pulling PORT_EN high from the 5v rail on the breadboard instead of the on-board 3.3v. It worked both times, because luckily the data sheet says it's 5v tolerant.
I also had the damned board plugged in the socket backwards, so I was feeding the incoming 5v to pin 15 instead of 1 !!! ahhhh. So I re-did everything with the stuff connected the right way and replaced some of the pics in the photo album. So one of those links in the previous post is dead now. Both modules erased and programmed successfully the 2nd time around, so maybe I didn't kill anything. https://goo.gl/photos/7wRjuTUDv6cojpjU9 -- bkw On Sun, Feb 19, 2017 at 6:26 PM, Brian White <[email protected]> wrote: > > That worked! > > I don't know what to do next, but it says programming suceeded. > > call 63012 just hung, so I guess an image of some sort still needs to be > loaded. > > Should I now follow the 4.9 update instructions, which would also serve as > a first time clean install? > > > https://photos.google.com/share/AF1QipPJNUW-liQ5gNreJ7yIVSpcRFLI1Rc5J2Jilv > VlWL7_6VLMefMwbKHelHpMLQsOzQ/photo/AF1QipOVigLQapQwIbTO7hMGsqlK3W > t9xPsXDzXh9-o-?key=WmdhblljUlA2UngydnV3WTVOS0NJTEVxQjEwMERR > > https://photos.google.com/share/AF1QipPJNUW-liQ5gNreJ7yIVSpcRFLI1Rc5J2Jilv > VlWL7_6VLMefMwbKHelHpMLQsOzQ/photo/AF1QipOmROW_Xr6_R- > 0I1MOZwII3_M9Lc71z3DeT1Taq?key=WmdhblljUlA2UngydnV3WTVOS0NJTEVxQjEwMERR > > > -- > bkw > > > > On Feb 19, 2017 8:16 AM, "Stephen Adolph" <[email protected]> wrote: > >> you probably have to pull port_en high to program it. >> >> >> On Sun, Feb 19, 2017 at 1:09 AM, Brian White <[email protected]> wrote: >> > Hey Stephen, am I missing anything here? >> > ... > >> > https://goo.gl/photos/7wRjuTUDv6cojpjU9 >> > >> >>
