Thanks in large part to Rich Cini and despite some technical issues, here are .WAV files of the M100 Bar Code drivers and programs; the only one AFAIK still outstanding is 26-1183A which includes the DVI versions.
26-1183 (Original drivers supplied with the wand): https://drive.google.com/open?id=1BRfvgl0kTT-VvjoN39Z66WcIkmE9Qwld 26-3846 (Additional drivers) https://drive.google.com/open?id=1MHdmylxARwnCcNxuKOa6J91rhwOITCo7 26-3845 (Bar Code Generator) https://drive.google.com/open?id=1Do8R5v0K0tEMWZQa1MErzwjJ5CQ-UX7Y m ----- Original Message ----- From: Peter Noeth To: [email protected] Sent: Wednesday, December 13, 2017 2:42 AM Subject: [M100] Looking for the Barcode drivers on the 26-3846 cassette Hello Group, I am new to this list, having just discovering the Club100 website several months ago. I was quite shocked to see that there had been product development for the M100 computer as recently as 2011!! My inquiry to the list is that I am looking for the "2of5", "Codabar" and "UPC-E" barcode drivers that were made available on the 26-3846 cassette for the Model 100 computer. This cassette was not very well advertised, and I have not seen one come up on eBay yet, although the standard Barcode wand and cassette do show up from time to time. I have had a Model 100 shortly after they first came out in '83 (mine was a March '84) and later swapped it for a M102. I use the M102 today for Electronics calculations and as a Barcode Data Capture device. I would like to get the additional barcode drivers to complete my collection, as I do have a project to use 2of5. The format could be a memory dump of each driver, or a copy on tape. Regards, Peter Noeth
