Mike, I got the files to load and run: I2OF5, CDABR, UPCEAN and the basic demo program RDBC2
There were also a second set: I2OF5D, CDABRD, UPCEAD and the basic demo program RDBCD2 The second set I expected must be for the M200, as the HIMEM settings were lower in RAM (around 56888) than the original M100 set (around 61788). However in seeing your last response, these may have well been for use with the DVI (driver names end with "D"). I tested the M100 drivers and they all work. The UPCEAN driver reads UPC-A, UPC-E (both the single 6-digit code and the 6-digit code + the separated 2-digit extension), EAN-8 and EAN-13. I have the original RS Barcode wand, but for normal use, I use the more industrial Unitech MS120-NTCB00-SG as it has the sapphire tip that doesn't really ever wear. Although the LED remains ON all the time, it is brighter than the RS version (which was made by Hewlett Packard for the HP-41 calculator) and seems to be better at reading lo-contrast barcodes as are often common on soda cans. The RS wand wears the plastic tip down with heavy use, which affects the focal distance of the LED beam, and it is not sealed so needs the dust blown out of it occasionally. Since replacement tips are not available, my RS wand stays in the original package. Thanks again, Peter On Tue, Dec 26, 2017 at 3:22 PM, Mike Stein <[email protected]> wrote: > Hi Peter, glad we could help out! > > I believe the 26-3846 already includes the DVI files for anyone who might > need/want them and I only mentioned the -1183A for completeness in case > someone out there has a copy; AFAIK there isn't a copy to be found anywhere. > > Will try to collect the relevant manuals one of these days. > > m > > ----- Original Message ----- > *From:* Peter Noeth <[email protected]> > *To:* Mike Stein <[email protected]> > *Cc:* Model 100 Discussion <[email protected]> > *Sent:* Monday, December 25, 2017 7:41 PM > *Subject:* Re: [M100] Looking for the Barcode drivers on the 26-3846 > cassette > > Mike, > > Deepest thanks to Rich Cini and yourself for the "digital Cassette" of > RS 26-3846. :-) > > I down loaded the .WAV file, and after a few runs to get the volume > right, I was able to load the files to the M102. I will do some testing > later in the week, and if I have any problems, I will let you know. > > Since I don't have (or ever intend on getting) the DVI, I will not need > the DVI version cassette. > > > Thanks again, > > Peter Noeth > >
