I've never built one before but I could take a stab at it if there are instructions.
On Sat, Jun 2, 2018, 5:27 PM Randall Kindig <[email protected]> wrote: > So, I take it no one on this list builds the M102 DVI cables? > > Shoot. > > Thanks > > Randy > > On May 28, 2018, at 10:47 PM, Randall Kindig <[email protected]> > wrote: > > Yeah, I’m not much for building these myself. > > Does anyone have one? > > Thanks > > Randy > > On May 27, 2018, at 4:23 PM, Brian White <[email protected]> wrote: > > That's the one easy one. You can get by without having to do those twists, > with a plain old IDE cable* and a double male pin header. > > http://tandy.wiki/Disk/Video_Interface:_Cable#Easy_Cable > > That's not polarized though. To get a fully polarized cable you can make > either the 102 or 200 cables shown there. > > * The old 40 conductor kind of cable, I don't know if the 80 conductor > kind works. Also make sure pin 20 isn't removed or plugged, and the wire > for pin 20 isn't punched out somewhere along the cable. > > > > On Sun, May 27, 2018, 2:44 PM Randall Kindig <[email protected]> > wrote: > >> Does anyone have or makes the DVI cable that works with an M102? I need >> one. >> >> Randy >> >> > >
