where can I get a Y2K ROM? On Mon, Jun 4, 2018, 7:02 PM Greg Swallow <[email protected]> wrote:
> Same symptoms with known good ROM installed. > > ----- Original Message ----- > From: "Fugu ME100" <[email protected]> > To: [email protected] > Sent: Monday, June 4, 2018 3:06:56 PM > Subject: Re: [M100] Model 102 Black Nothing After Y2K ROM install > > The 102 Ref manual is on this page > http://www.club100.org/library/libdoc.html of the club 100 site. This > should help 😊 > > > Does it work with the original ROM in the socket? > > > > ________________________________ > From: M100 <[email protected]> on behalf of Greg Swallow < > [email protected]> > Sent: Monday, June 4, 2018 22:50 > To: [email protected] > Subject: [M100] Model 102 Black Nothing After Y2K ROM install > > After fixing the M102 keyboard and replacing the top-case went so well, I > figured I'd go ahead and put in a Y2K ROM. Removed the old and put in > machined headers to have a makeshift socket. M102 powers up, contrast can > go light/dark on the screen, but nothing else. Checked the solder joints > and related traces on the PCB with and without the ROM. Unit has good > batteries and 6VDC. I've done this before -- twice, so this one has me in a > quandary. I am limited to my Fluke 77/BN for testing. Have not been able to > find the M102 Service Manual anywhere to have more reference. Did notice > the LCD ribbon was a bit pushed in (one wire worth) on the keyboard side of > the ribbon. > > With that I pose the question of, any ideas? > > Appreciate anything, > > GregS <>< >
