I wanted to thank everyone who had the suggestions to assist me with getting the Model 200 and TELCOM to connect to BBSs using the Paul Rickards Wifi232 modem.
Unlike my Model 102, which "just worked" with the modem, the 200 did not. The trick was bridging the solder pads on the back of the mode like so: 1. Solder a bridge across the center of FLOW IN to RTS. 2. Solder a bridge across the center of FLOW OUT to CTS. Once this was in place, it worked perfectly. Thought I would write back so it's on the list for others to find.
