On Tue, Jun 5, 2018 at 2:27 PM Eric Nelson <[email protected]> wrote:
> I wanted to thank everyone who had the suggestions to assist me with > getting the Model 200 and TELCOM to connect to BBSs using the Paul Rickards > Wifi232 modem. > > Unlike my Model 102, which "just worked" with the modem, the 200 did not. > The trick was bridging the solder pads on the back of the mode like so: > > 1. Solder a bridge across the center of FLOW IN to RTS. > 2. Solder a bridge across the center of FLOW OUT to CTS. > > Once this was in place, it worked perfectly. Thought I would write back so > it's on the list for others to find. > > Huh! So does that mean RTS and CTS are not connected by default? — John.
