Thanks for the tips everyone. I already had the connectors, so looking
at the pdf Brian linked I was able to solder together a cable and it works!
Thanks again,
Bernie
On 9/15/2018 2:06 AM, Brian White wrote:
You are in luck. There is no real wiring required. You buy two
particular connectors and simply crimp them on to a flat ribbon cable.
Just place the red wire on pin #1 on both connectors.
http://www.club100.org/ftp/m100-oppedahl-2.pdf
https://photos.app.goo.gl/cRjUL6za4TcW8Ea16
https://www.ebay.com/itm/182447194403
https://www.ebay.com/itm/332724829354
https://www.ebay.com/itm/321737466141
--
bkw
On Sat, Sep 15, 2018 at 12:33 AM bernie <[email protected]
<mailto:[email protected]>> wrote:
Hello.
I'm trying to build a printer cable to connect to a Dot Matrix Epson
printer with a centronics port. Does anyone know what the connections
are between the idc 26 female and the Centronics male connector ?
Thank you.
--
bkw
