http://bitchin100.com/wiki/index.php?title=HTERM
Download the 100/102 version of the .CO file, copy to the T102, read
"loading a typical co file"
The serial parameters are hard-coded. The other end of the connection
must be set to 38,400 8N1 rts/cts
--
bkw
On 7/23/19 5:24 PM, Adam Dawson wrote:
Hello all,
I saw a post on Mastodon from Willard Goosey about the Tandy Model 100 series.
Went to ebay and ordered me one. I have yet to receive it.
I said I wanted to use it as a terminal and it has been suggested to be by
Willard and Andrew from retro.social to look into hterm because it supports
hardware handshaking.
I found this: http://bitchin100.com/pub-git/
On my Linux box I did this:
'git clone http://bitchin100.com/pub-git/hterm.git/'
I did 'TARGET=m100 make configure'
and then tried to build...
$ make
echo " .ORG 0" > ORIGIN.H
wine '\TASM.EXE' -t85 -b -s HTERM.ASM
wine: cannot find '\TASM.EXE'
Makefile:37: recipe for target 'HTERM.obj' failed
make: *** [HTERM.obj] Error 2
TASM is referenced in the BUILD file and there is a lnk:
http://home.comcast.net/~tasm/
seems broken.
I have NO idea what I am doing.
--Do I really have to build this?
--Does someone have it all built I can use?
--opening winecfg seems promising. Do I load something in there?
Any guidance is appreciated. :)
Thanks!
[email protected]
