James, I'll have to do a little research on the machine. I don't know anything about it and if it doesn't support the TPDD then I doubt it is something I would venture into it. Let me check and I'll get back to you. Time is a bit tight right now but when I get a chance I'll do a little digging.
Kurt On Tue, Sep 24, 2019, at 12:33 PM, James wrote: > Hi Kurt > > Thank you for replying. > > Are you interested in potentially expanding the support for those devices? > > I ask, because I would be more than happy to avail my myself and my NC100 to > you in any shape or form. As it would make the device really damn handy. Atm > I have to serial to my phone a xmodem from the Amstrad to the phone. > Capturing the text as it comes. > > James > > > > -------- Original Message -------- > Subject: Re: [M100] Mcomm > From: Kurt McCullum > To: [email protected] > CC: > >>> I don't own a NC100 so I really don't know. I do know that the WP-2 gives >>> mixed results with mComm. I have read that blog post which seemed to >>> indicate that it works on the WP-2 but user reports here on the list >>> indicate that it doesn't work reliably. If I end up with a WP-2 at some >>> point I'll address it but for now I'd say you are better off with >>> LaddieAlpha for the WP-2. >>> >>> Kurt >>> >>> On Tue, Sep 24, 2019, at 12:09 PM, James wrote: >>>> So I use mcomm exclusively with my M100. However I recently saw a blog >>>> about someone using a Tandy WP-2. I have an Amstrad NC100 which I think is >>>> the same thing but rebadged. >>>> >>>> Was just wondering Kurt could tell me if he knew if it'll work with a >>>> NC100 computer. >>>> >>>> >>>
