If it's the same Flash memory cards I'm thinking of. You had to have a special treat reader. I used to own a HP95LX which took those cards, ended upgrading to the 200LX model because I could use a PCMCIA adapter with a CF card. The Flash cards won't read in a conventional pc PCMCIA port.
At least to my knowledge, it's what everything I've read thus far leads me to believe. But there's always some bright spark who might figure it out. On Wed, 25 Sep 2019, 5:23 am Abraham Moller, <[email protected]> wrote: > I tried those and they fail, at least for me. Perhaps my Linux is too new? > The PCMCIA drivers are indeed very old. > > As I recall, ZCN is loaded by the serial port, but it requires an SRAM > card for storage. > > On Wed, 25 Sep 2019, 00:18 John R. Hogerhuis, <[email protected]> wrote: > >> There seem to be a few tutorials around for Linux mounting sram pcmcia >> cards. >> >> I was looking at ZCN which at some point I tried in a nc100 but that is >> loaded via serial port. So maybe I never did mount one of these cards. >> >> -- John. >> >
